« previous next »
Pages: [1]   Go Down

Author Topic: Jim Chambers kit build  (Read 6359 times)

Offline David Price

  • Hero Member
  • *****
  • Posts: 703
    • The Flintlock Shop
Jim Chambers kit build
« on: March 27, 2017, 11:27:03 PM »
I just finished putting a Jim Chambers kit together .  It practically put itself together.

Attached are the pictures of the build start to finish.  I don't know how many pictures can be posted at one time so I will send them in two separate posts. 

Lets see if I can do this again. 

David Price
































photo upload internet
Logged

Offline David Price

  • Hero Member
  • *****
  • Posts: 703
    • The Flintlock Shop
Re: Jim Chambers kit build
« Reply #1 on: March 27, 2017, 11:32:40 PM »
These are the remaining pictures.

David Price
Logged

Offline David Price

  • Hero Member
  • *****
  • Posts: 703
    • The Flintlock Shop
Re: Jim Chambers kit build
« Reply #2 on: March 27, 2017, 11:37:32 PM »
Sorry, I forgot to upload them.   I will try again.



































Logged

ltdann

  • Guest
Re: Jim Chambers kit build
« Reply #3 on: March 27, 2017, 11:42:34 PM »
The shell carving is fantastic!  Did you free hand draw that?
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Jim Chambers kit build
« Reply #4 on: March 27, 2017, 11:44:23 PM »
Your shop is as big a wreck as MINE. We can't have two warped minds in the same forum.
Or can we ;D

Bob Roller
« Last Edit: March 28, 2017, 03:41:55 AM by Ky-Flinter »
Logged

Offline FALout

  • Hero Member
  • *****
  • Posts: 875
Re: Jim Chambers kit build
« Reply #5 on: March 28, 2017, 01:10:23 AM »
His shop is cleaner then mine, I can see some open spots!
Logged
Bob

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: Jim Chambers kit build
« Reply #6 on: March 28, 2017, 01:53:46 AM »
  David that's one fine gun. Well done. Looks like a gun builders shop to me...! Oldtravler
Logged

Offline Kingsburyarms

  • Jon Rider
  • member 2
  • Hero Member
  • ****
  • Posts: 956
  • Jon Rider
Re: Jim Chambers kit build
« Reply #7 on: March 28, 2017, 02:24:13 AM »
Fantastic job - the Shell carving is great - and the barrel engraving - I like the fit of the butplate  - Liked yours so much, I did order that 20 gauge Officers Fusil from Jim.... Winter project...
Logged

Offline David Price

  • Hero Member
  • *****
  • Posts: 703
    • The Flintlock Shop
Re: Jim Chambers kit build
« Reply #8 on: March 28, 2017, 02:41:07 AM »
itdann

I did draw the shell by hand, but I copied one that I saw in John Schippeers  engraving book.
Most of my drawings are of my own design, but I do look through all the books for ideas.

Bob Roller
Most visitors that come to my shop expect to see all the chisels lined up with label up, no wood chips of dust on anything.  My shop is not a show place, I turn out a lot of fine guns there , and clean up after each project.
Visitors are welcome any time.   Actually I didn't think it looked that bad.

David Price



Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Jim Chambers kit build
« Reply #9 on: March 28, 2017, 02:26:56 PM »
If you keep that up you might get good enough one day I might be able to find something around here for you to work on. ;)
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Jim Chambers kit build
« Reply #10 on: March 28, 2017, 04:35:12 PM »
Quote from: David Price on March 28, 2017, 02:41:07 AM
Bob Roller
Most visitors that come to my shop expect to see all the chisels lined up with label up, no wood chips of dust on anything.  My shop is not a show place, I turn out a lot of fine guns there , and clean up after each project.
Visitors are welcome any time.   Actually I didn't think it looked that bad.

David Price
I have been to Dave's shop twice and I agree, it really is not that bad.  I have the same philosophy, let things go and clean up after each project.  A couple of times a year I host an open house in my shop and will break down and clean things up a bit, then I can't find anything for a week.  ;D   
David
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Jim Chambers kit build
« Reply #11 on: April 01, 2017, 07:37:55 PM »
Dave,

EEEEYOW!  Those shell are wonderful.   That is some of the finest tang carving design I have seen. 

I like the interplay of the barrel engraving, the tang engraving, and the carving. 

The deep finish you added makes everything pop. 

Many thanks for sharing.  Best wishes, and God Bless,   Marc
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Jim Chambers kit build
« Reply #12 on: April 01, 2017, 08:01:08 PM »
Very credible job on a superlative parts set.  I have the same gun and it is one of my favourites.  With patched round ball, I shoot it, out to about sixty yards, as well as I shoot my rifles.  And it is a natural follow through for shooting flying.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Jim Chambers kit build
« Reply #13 on: April 02, 2017, 03:59:48 PM »
David, I've always looked forward to seeing your wonderful work at the CLA show in Lex. Thanks for posting it here for us all to enjoy.          Bob
Logged
South Carolina Lowcountry

Offline Mick C

  • Sr. Member
  • ****
  • Posts: 421
Re: Jim Chambers kit build
« Reply #14 on: April 07, 2017, 07:20:55 PM »
My gosh!!  I haven't picked my chin up off the floor yet.  That is AMAZING!!....Mick C
Logged
My profile picture is my beloved K9 best friend and soulmate, Buster Brown, who passed away in 2018.  I miss you buddy!

Offline Waksupi

  • Sr. Member
  • ****
  • Posts: 358
  • Ric Carter, Somers, Montana
Re: Jim Chambers kit build
« Reply #15 on: April 07, 2017, 10:55:25 PM »
Fine job!
Logged
Ric Carter
Somers, Montana
Pages: [1]   Go Up
« previous next »