« previous next »
Pages: [1]   Go Down

Author Topic: B.Evans Valley Forge musket  (Read 2738 times)

7mmBR

  • Guest
B.Evans Valley Forge musket
« on: June 29, 2017, 03:27:16 PM »
« Last Edit: July 01, 2017, 03:29:33 PM by 7mmBR »
Logged

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 1105
  • Send me your rifles for the ALR Library!
    • Black Powder Historian
Re: B.Evans Valley Forge musket
« Reply #1 on: June 29, 2017, 04:23:57 PM »
Sure looks like one and is in the date range of them. Brooke Evans had a contract for 10,000 of them in the 1820s.
Logged
I am the Lead Historian/Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Nate McKenzie

  • Hero Member
  • *****
  • Posts: 1019
  • Luzerne Co. PA
    • Nathan McKenzie Gunmaker
Re: B.Evans Valley Forge musket
« Reply #2 on: June 30, 2017, 02:57:55 AM »
1816 third model Evans contract musket.
Logged

Offline wormey

  • Full Member
  • ***
  • Posts: 196
Re: B.Evans Valley Forge musket
« Reply #3 on: June 30, 2017, 03:19:39 AM »
It`s an 1816 that has had the barrel shortened considerably.  The original barrel length would have been 42 inches and it would have had the large double type front barrel band.  The brass nose cap was used on model 1855 Harpers Ferry rifles and are also found on confederate pieces so it could have been shortened in a confederate armory after being damaged and reissued in shorter form. Some US troops were issued flintlock m1816s early in the war and the fact that the lock appears to be an original flint does not preclude its being refurbished and reissued to somebody early in the war especially on the confederate side.   
Logged

Offline wormey

  • Full Member
  • ***
  • Posts: 196
Re: B.Evans Valley Forge musket
« Reply #4 on: June 30, 2017, 03:41:44 AM »
By the way, with the 1823 date on the lockplate, that triggerguard would be an incorrect replacement.  The guard should be a 1st or second model with the rear sling swivel loop attached through a stud that comes through the front of the triggerguard.  More reason to suspect that he has been reworked.
Logged
Pages: [1]   Go Up
« previous next »