« previous next »
Pages: [1]   Go Down

Author Topic: Multi piece barrels  (Read 2676 times)

JNG3

  • Guest
Multi piece barrels
« on: July 30, 2017, 12:58:44 AM »
Does any barrel company still produce barrels that are of multi piece construction? I know many many years ago some cheap import pseudo 'kentucky' rifles from Japan had barrels that were 2 pieces screwed together. If I recall correctly these barrels also were problematic. I have a barrel that is suspect and am curious if any company still does this.

In case anyone does not understand, I am not referring to the barrel and breech screwed together. I am referring to the barrel itself being of more than one piece.
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Multi piece barrels
« Reply #1 on: July 30, 2017, 01:05:28 AM »
I had Getz make me some 2 piece barrels that were 60" long years ago. The were neither cheap nor problematic.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1428
Re: Multi piece barrels
« Reply #2 on: July 30, 2017, 04:40:47 AM »
I also had one of Don Getz's two pc barrels. I knew it was threaded at the wedding band but could never see it, there was the faintest hairline visible on the inside. Shot and cleaned flawlessly, as far as I know it is still going strong (?).
Kevin
Logged
PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson

CavSoldier3ACR

  • Guest
Re: Multi piece barrels
« Reply #3 on: July 30, 2017, 08:50:58 AM »
What would be the value of a two piece barrel?
Logged

Offline EC121

  • Hero Member
  • *****
  • Posts: 1611
Re: Multi piece barrels
« Reply #4 on: July 30, 2017, 03:35:46 PM »
It lets the barrel maker make a barrel longer than his machinery's capacity. 
Logged
Brice Stultz

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5565
Re: Multi piece barrels
« Reply #5 on: July 30, 2017, 04:38:29 PM »
Hoppe's made a .45 cal. Target pistol that had a two piece barrel. A friend shot one for years, and had no trouble with it.

  Hungry Horse
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Multi piece barrels
« Reply #6 on: July 31, 2017, 12:35:27 AM »
 Side by side ones work well.
Logged
Nobody is always correct, Not even me.

JNG3

  • Guest
Re: Multi piece barrels
« Reply #7 on: July 31, 2017, 02:02:13 AM »
Hah hah Jerrywh.

HungryHorse, this Hoppes you reference. Was that the same Hoppes company that still exists today, you know the #9 solvent folks?
« Last Edit: July 31, 2017, 01:18:58 PM by JNG3 »
Logged

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5565
Re: Multi piece barrels
« Reply #8 on: July 31, 2017, 05:07:46 AM »
Yup, made a boxlock target pistol, and a single action pepperbox as well. Both pretty rare today. I own one of each. Both had their own problems. The reason I know the target pistol had a two piece barrel is mine had a bur inside where the nipple treads enter the chamber. So to fix it I had to unscrew the front half of the barrel.

  Hungry Horse
Logged
Pages: [1]   Go Up
« previous next »