Author Topic: Fowler or smooth rifle?  (Read 2134 times)

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Fowler or smooth rifle?
« on: November 03, 2017, 04:07:38 PM »
I am a beginning student of antique longrifles, so any and all comments will be appreciated.  I am curious about this piece. 

The following makes me think smooth rifle. The barrel is octagon to round, smoothbored, but it has a flat on the top of the barrel from breech to muzzle.  It has a rear sight.  The front sight is elongated, not a simple bead.  The trigger guard has a spur.

But there is no cheek piece, and other than the spur the trigger guard and the butt plate look fowler.  What do you think?

Thanks,
-Ron









« Last Edit: November 03, 2017, 04:13:46 PM by Ky-Flinter »
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Fowler or smooth rifle?
« Reply #1 on: November 03, 2017, 05:03:50 PM »
I lean toward fowler on this one. Not all are easily categorized. What caliber smoothbore is it?
Andover, Vermont

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7500
  • Born in Kentucke, just 250 years late
Re: Fowler or smooth rifle?
« Reply #2 on: November 03, 2017, 05:13:38 PM »
Thanks Rich.  The barrel is .57 caliber, 39" long.  The lock is marked T. Ketland & Co.

-Ron
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline Chowmi

  • Hero Member
  • *****
  • Posts: 843
Re: Fowler or smooth rifle?
« Reply #3 on: November 03, 2017, 05:40:15 PM »
Looks like it has Cast-on, rather than Cast-off as well.
Interesting

Norm
Cheers,
Chowmi

NMLRA
CLA

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Fowler or smooth rifle?
« Reply #4 on: November 03, 2017, 05:52:45 PM »
Hard to tell when that rear sight may have been put on there. Generally top sighting flats are found on NE guns and French guns. That's probably where this barrel originated. Most of the mounts look new England , but the stock architecture isn't quite right. I'd call it a fowling gun with a rear sight added. ;)
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?