« previous next »
Pages: [1]   Go Down

Author Topic: barrel tenon pins question  (Read 1590 times)

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
barrel tenon pins question
« on: January 07, 2018, 04:49:37 PM »
I have had my barrel out of the stock for about 7 or 8 days while I was inletting my ramrod thimble and pipes. When I went to re-pin the barrel only 2 of the four pins went back in. The two at the muzzle end wont go. I can see light thru the holes and am guessing they are about .020 out of location. It seems the stock has moved on me. Any suggestions on what I should do would be great!
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7495
  • Born in Kentucke, just 250 years late
Re: barrel tenon pins question
« Reply #1 on: January 07, 2018, 05:04:27 PM »
I'm guessing you haven't elongated the holes in the underlugs.  That is a good thing to do for this very reason.  If the pins had been in place when the wood moved, the wood will crack.

-Ron
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline Brian Jordan

  • Hero Member
  • *****
  • Posts: 548
  • Pennsylvania
Re: barrel tenon pins question
« Reply #2 on: January 08, 2018, 12:57:17 PM »
Ron, That is exactly what I did and problem solved!

Thanks!!
Logged
Elizabeth, PA

"No free man shall ever be debarred the use of arms"...Thomas Jefferson

Let's Go Brandon!
Pages: [1]   Go Up
« previous next »