« previous next »
Pages: [1]   Go Down

Author Topic: Soldering sight on browned barrel  (Read 1412 times)

Offline rollingb

  • Full Member
  • ***
  • Posts: 181
Soldering sight on browned barrel
« on: May 04, 2018, 10:43:33 PM »
Is this recommended, or should the browning be removed down to bare metal before soldering?
Logged
http://tradmla.org/tmaf/index.php
"An honest man is worth his weight in gold"

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5123
Re: Soldering sight on browned barrel
« Reply #1 on: May 04, 2018, 11:16:34 PM »
It should have been soldered on before the barrel was browned.  So Yes, it has to be bright shiny metal to solder to.
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19487
    • GillespieRifles
Re: Soldering sight on browned barrel
« Reply #2 on: May 04, 2018, 11:24:39 PM »
Quote from: rollingb on May 04, 2018, 10:43:33 PM
Is this recommended, or should the browning be removed down to bare metal before soldering?
Probably should not tell this but the last Fowler I built I used one of those silver heart shaped front sights. I did not get the sight until after I had browned the barrel. Was in a hurry (as I often am :D) and stuck in on with super glue. Now 3 years later its still there! I am not saying you will have that kind of luck but you might try it. If I had to buy the glue I probably would try something stronger than Super Glue.
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Iktomi

  • Guest
Re: Soldering sight on browned barrel
« Reply #3 on: May 05, 2018, 12:34:26 AM »
Quote from: Dennis Glazener on May 04, 2018, 11:24:39 PM

Probably should not tell this but the last Fowler I built I used one of those silver heart shaped front sights. I did not get the sight until after I had browned the barrel. Was in a hurry (as I often am :D) and stuck in on with super glue. Now 3 years later its still there! I am not saying you will have that kind of luck but you might try it. If I had to buy the glue I probably would try something stronger than Super Glue.
Dennis

  Nothing but wooden flints for you for the next 6 months!  :o  ;)
Logged

Offline rollingb

  • Full Member
  • ***
  • Posts: 181
Re: Soldering sight on browned barrel
« Reply #4 on: May 05, 2018, 01:13:01 AM »
Quote from: T*O*F on May 04, 2018, 11:16:34 PM
It should have been soldered on before the barrel was browned.  So Yes, it has to be bright shiny metal to solder to.
That's what I figured,... took this NW Trade Gun in on trade and just got done cutting the barrel back back to 30" so I can hold it without pain in my torn rotator cuff.

Thanks everyone for your replies.
Logged
http://tradmla.org/tmaf/index.php
"An honest man is worth his weight in gold"

ddoyle

  • Guest
Re: Soldering sight on browned barrel
« Reply #5 on: May 05, 2018, 01:41:43 AM »

tin the sight and prepare a neat landing for it, exercise restraint and care and you can get away with it.
Logged
Pages: [1]   Go Up
« previous next »