« previous next »
Pages: [1]   Go Down

Author Topic: Nosecap  (Read 1600 times)

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1428
Nosecap
« on: January 20, 2018, 04:56:31 PM »
In a recent thread Curtis showed his nose cap fabrication that was clear and well done.
I don't want't to take away from his thread so I thought I'd ask here; how is the barrel layout transferred to the nose cap for cutting?


photoupload

Kevin
Logged
PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1523
Re: Nosecap
« Reply #1 on: January 20, 2018, 05:57:05 PM »
Paint the inside of the nose cap with layout fluid (magic marker), put the cap back on the stock, scribe the front of the cap following the barrel inlet, remove cap and saw/file to the scribe line.

Greg
Logged
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Nosecap
« Reply #2 on: January 22, 2018, 07:39:53 PM »
The method Greg mentioned is what I used on the cap pictured.

Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing
Pages: [1]   Go Up
« previous next »