« previous next »
Pages: [1]   Go Down

Author Topic: I thought brass was bad....  (Read 2282 times)

ltdann

  • Guest
I thought brass was bad....
« on: January 31, 2018, 12:26:42 AM »
but filing on silver is worse! :P

I've been putting decorative fine silver on some of the brass on the new build, butt-plate, trigger guard etc..   I probably get two strokes of a file before it loads up and I need to card it.  I swear I've about worn out my file card keeping the teeth clean and no amount of chalk seems to make the difference.

It's like filing beeswax!
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15839
Re: I thought brass was bad....
« Reply #1 on: January 31, 2018, 01:42:03 AM »
A brass rifle case, say a .30 cal, the mouth of which is rubbed across the teeth, (it will embed/fit itself into the file grooves) will clean them easier and with less damage than a file card will deliver.  The case can even clean embedded aluminum out of a file that a card will not touch. I know this because!!!
« Last Edit: January 31, 2018, 01:42:57 AM by Daryl »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

ltdann

  • Guest
Re: I thought brass was bad....
« Reply #2 on: January 31, 2018, 02:02:14 AM »
Quote from: Daryl on January 31, 2018, 01:42:03 AM
A brass rifle case, say a .30 cal, the mouth of which is rubbed across the teeth, (it will embed/fit itself into the file grooves) will clean them easier and with less damage than a file card will deliver.  The case can even clean embedded aluminum out of a file that a card will not touch. I know this because!!!

I've got plenty of those, I'll give it a try, thanx!
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: I thought brass was bad....
« Reply #3 on: January 31, 2018, 02:20:24 AM »
 Don't put so much pressure on the file.  Gold is twice as bad. You can't get gold out of a file.
Logged
Nobody is always correct, Not even me.

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2397
Re: I thought brass was bad....
« Reply #4 on: January 31, 2018, 02:45:17 AM »
Aren't soft metals better scraped vs. filed?
Logged

Offline Bill Raby

  • Hero Member
  • *****
  • Posts: 1545
Re: I thought brass was bad....
« Reply #5 on: January 31, 2018, 06:39:15 AM »
Use the valtitan files made by Glardon-Vallorbe. Even platinum does not clog them up.
Logged

ddoyle

  • Guest
Re: I thought brass was bad....
« Reply #6 on: January 31, 2018, 06:45:20 AM »
Jerry send those files over and I will clean em for you. free of charge ;)  maybe we should start with the coarse ones.
Logged

Maineshops

  • Guest
Re: I thought brass was bad....
« Reply #7 on: January 31, 2018, 04:34:12 PM »
Chalk your files. It helps pinning guide a bit and use less pressure as mentioned. Dan
Logged
Pages: [1]   Go Up
« previous next »