Author Topic: New Augusta/Rockbridge VA Rifle  (Read 6000 times)

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: New Augusta/Rockbridge VA Rifle
« Reply #25 on: March 13, 2018, 05:01:21 PM »
Mark..., beautiful rifle and great representation of the school!


         Ed
Ed Wenger

Offline elkhorne

  • Hero Member
  • *****
  • Posts: 529
Re: New Augusta/Rockbridge VA Rifle
« Reply #26 on: March 23, 2018, 07:49:25 AM »
Mark,
Absolutely beautiful job! Your brother is one lucky guy and I know this will be his most prized possession. I love all you did with this rifle and your carving is fantastic. Congratulations on a job well done.
elkhorne

tim skipper

  • Guest
Re: New Augusta/Rockbridge VA Rifle
« Reply #27 on: March 23, 2018, 03:47:14 PM »
how do you see the pictures

Iktomi

  • Guest
Re: New Augusta/Rockbridge VA Rifle
« Reply #28 on: March 23, 2018, 04:03:19 PM »
Just beautiful...

Offline t.caster

  • Hero Member
  • *****
  • Posts: 3729
Re: New Augusta/Rockbridge VA Rifle
« Reply #29 on: March 23, 2018, 04:47:01 PM »
That's EXCELLENT craftsmanship, Mark. You do some real fine work!
Tom C.

Mikecooper

  • Guest
Re: New Augusta/Rockbridge VA Rifle
« Reply #30 on: March 23, 2018, 05:22:46 PM »
The finish looks really good.  What stain do you use? It's refreshing to see a stain that does not cause grain reversal.   

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: New Augusta/Rockbridge VA Rifle
« Reply #31 on: March 23, 2018, 05:31:24 PM »
Hmmm, now I'm wondering what grain reversal is...... ???
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Dan'l 1946

  • Hero Member
  • *****
  • Posts: 628
Re: New Augusta/Rockbridge VA Rifle
« Reply #32 on: March 23, 2018, 05:47:32 PM »
Beautiful rifle! I'm with Mike: what is "grain reversal"?
                                       Dan

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: New Augusta/Rockbridge VA Rifle
« Reply #33 on: March 24, 2018, 01:19:21 AM »
The finish looks really good.  What stain do you use? It's refreshing to see a stain that does not cause grain reversal.

I just used a dilute solution of AF with three coats of Tried and True on top.    However, the stock was well burnished with a lt gray ScotchBrite pad before and after staining.   That was after whiskering at least three times with a very sharp scraper.   I paid particular attention to scraping right up to the edge of the carving to get rid of the roughness where I stamped the design.     The surface isn't going to get any better after you apply your final finish.   

Mikecooper

  • Guest
Re: New Augusta/Rockbridge VA Rifle
« Reply #34 on: March 24, 2018, 05:05:42 AM »
Grain reversal, I'm looking on google to find a good picture to illustrate.  It happens when you apply a dark stain to light colored wood.  More noticeable on soft woods like pine or spruce but can happen on hard woods like maple also.   White wood consists of light colored grain and denser dark grain lines as in the left picture,  but when you apply a dark stain the light wood turns dark and the dark wood looks light in comparison because the dark stain absorbs more into the less dense white grain and not so much in the dark dense grain. You can see it in some maple gun stocks that have a dark stain.  On maple it's not as noticeable because the dark lines are thin to begin with but it happens.
 


« Last Edit: March 24, 2018, 05:10:29 AM by Mikecooper »

n stephenson

  • Guest
Re: New Augusta/Rockbridge VA Rifle
« Reply #35 on: March 26, 2018, 07:00:49 AM »
Mark, That is a real nice rifle! Nice lines , clean work!  Lucky Brother!