Author Topic: Fired Up My Old Forge  (Read 6259 times)

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Fired Up My Old Forge
« on: February 25, 2018, 06:43:30 PM »
A few years ago, with the passing of my father, I inherited what was left of my great-grandfather’s forge. It had been out of service for decades, the fire pot cracked and broken, tossed in a corner of the barn. My father said he rembered playing with the tools and blower when he was a kid...and the old anvil sure shows plenty of evidence of generations of “ blacksmiths” beating on it 😆.

So, I started cleaning things up, and seeing what could be salvaged...the hand-crank blower seemed to work fine, but the mounting bracket to attach it to the cast iron forge was long gone, as was the air ducting. It took a little figuring, and some CAD (cardboard aided design 😆) but I made up a new mounting bracket. Then I cut out the remains of the old cracked fire pot, and bolted in a new one from Centaur Forge.
















Some wire brushing, and some high-temp grill paint, and things were looking better. I plumbed the air ducting with a piece of automobile flex exhaust tubing, and made a simple ash dump and clinker breaker.








And fired up yesterday with some good Kentucky coal.  I don’t think I’ll be Forge welding any barrels any time soon, but I think it’ll work for small projects, and to get me started learning a little about the craft.

Greg
« Last Edit: January 14, 2020, 02:42:01 AM by rich pierce »
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline Robert Wolfe

  • Hero Member
  • *****
  • Posts: 1286
  • Great X Grandpa
Re: Fired Up My Old Forge
« Reply #1 on: February 26, 2018, 12:43:58 AM »
Looks good. Its ready for several more generations of use!
« Last Edit: February 26, 2018, 12:44:26 AM by Robert Wolfe »
Robert Wolfe
Northern Indiana

Offline marcusb

  • Full Member
  • ***
  • Posts: 106
Re: Fired Up My Old Forge
« Reply #2 on: February 26, 2018, 12:51:02 AM »
Great restoration, and to have the family connection is priceless!

Offline David R. Pennington

  • Hero Member
  • *****
  • Posts: 2927
Re: Fired Up My Old Forge
« Reply #3 on: February 26, 2018, 05:16:48 AM »
Hey Greg,
That looks like a great set up and good to see you are putting it back into service. I don't see any reason you couldn't get barrel welding heats with some good coal. Looks like that pot will give you enough depth in your fire, and that blower should provide a good blast. Good metalurgical grade coal is very desireable.
Before starting a barrel I would stock pile some good clean coke from previous sessions. Make sure you always have fuel in your fire under your metal to use up the air so you don't burn your work.
There has been a lot of forging done on that anvil, but she is still good for a lot more. Peter Wright or Mousehole? I have a well worn PW here made before the Civil War that is still a joy to use.
Happy Hammering!
VITA BREVIS- ARS LONGA

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Re: Fired Up My Old Forge
« Reply #4 on: February 26, 2018, 07:45:02 AM »
Thanks guys!  It’s an on-going process, but it’s underway now, at least.

David, my first order of business is tool making...other than a couple of new hammers, and a few sets of flea market tongs, I don’t have much to work with.  So, chisels, punches, drifts, fullering tools, all need to be fabricated. I’d also like to find me a decent swage block somewhere this spring.

As for the old anvil, I looked it over pretty good, and the only marking I can find is what appears to be a ships anchor stamped on one side. I’d imagine it’s just a hardware store brand, probably dating to the turn of the last century. I do have my eye on a nice Peter Wright that my best friend picked up cheap...He doesn’t have any use for it other than a yard ornament, so I’m hoping I can talk him out of it.

At any rate, now I’m started...as long as I can eventually make a few triggerguards, buttpieces, and a few knives and tomahawks, I’ll be tickled to death!

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline David R. Pennington

  • Hero Member
  • *****
  • Posts: 2927
Re: Fired Up My Old Forge
« Reply #5 on: February 26, 2018, 03:18:37 PM »
Greg, I make my tools as I have a need, it is an ongoing process. I am always on the lookout for tongs and the like at flea markets etc.,. Always learning. From the pictures the anvil looks like it is a forged iron anvil with a steel face and I would guess it has good rebound. Enjoy.
VITA BREVIS- ARS LONGA

Offline Robby

  • Hero Member
  • *****
  • Posts: 2655
  • NYSSR ―
Re: Fired Up My Old Forge
« Reply #6 on: February 26, 2018, 06:58:35 PM »
Looks pretty darn good to me G, family ties are a big bonus!!!!
Robby
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline okieboy

  • Hero Member
  • *****
  • Posts: 822
Re: Fired Up My Old Forge
« Reply #7 on: February 28, 2018, 03:08:00 AM »
 Some Fisher (Fisher-Norris) anvils are marked with an eagle holding an anchor. The anchor would be more or less horizontal.
Okieboy

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Re: Fired Up My Old Forge
« Reply #8 on: February 28, 2018, 06:52:08 AM »
Thanks Okie. This thing was so corroded that I could just barely make out what I think was an anchor. I tried making a pencil rubbing, but couldn’t tell much about it. I guess 50 years in a corner of an old barn is tough on things. I cleaned it up best I could, and it’s good enough just to know where it came from.

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7493
  • Born in Kentucke, just 250 years late
Re: Fired Up My Old Forge
« Reply #9 on: February 28, 2018, 09:15:18 PM »
Lookin' good Greg.  I have some of my great-grandfather's hand tools and always enjoy using them.  Good for you on bring the old forge back to life.

-Ron
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Fired Up My Old Forge
« Reply #10 on: March 01, 2018, 07:56:10 AM »
Nice work, made even better since it came down through the family!

Curtis
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline gumboman

  • Sr. Member
  • ****
  • Posts: 263
    • Gumbocooking
Re: Fired Up My Old Forge
« Reply #11 on: March 03, 2018, 04:07:02 PM »
Now that is cool. You are going to have some fun with that old forge.

RED333

  • Guest
Re: Fired Up My Old Forge
« Reply #12 on: March 11, 2018, 02:49:13 PM »
Nice work on getting the forge back in shape and all. Crush your coal into smaller pieces, say about 1/2 to 3/4 inch. Makes for better packing around your work piece. All in all I likey!

Offline heelerau

  • Hero Member
  • *****
  • Posts: 666
Re: Fired Up My Old Forge
« Reply #13 on: April 25, 2018, 10:36:26 PM »
I would clay line that forge, I have used clay from the garden which is still working fine in my riveting forge. Great job of recommissioning your family forge!!  Have you any of the original tools to go with it?
Cheers

Gordon
Keep yor  hoss well shod an' yor powdah dry !

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Re: Fired Up My Old Forge
« Reply #14 on: April 26, 2018, 02:28:20 AM »
Thanks guys.  Now that Spring is here, maybe I can find time to get back at it (if I can stop chasing turkeys... :o)

Gordon, the only original parts I could find were the forge, the blower, and the anvil. There were some tongs, and a few hammer heads, but they’ve gone missing.  I’ve started re-tooling at the local flea markets, and it’s coming along. 

Greg
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline heelerau

  • Hero Member
  • *****
  • Posts: 666
Re: Fired Up My Old Forge
« Reply #15 on: April 26, 2018, 04:41:30 AM »
Greg, I had bought my big buffalo forge 30 odd years ago, the fire pot was no good, but enough of it left to get the boiler makers at work to make me a new one for a carton of cider ! I finally built my smithy last year, takes me a long time to do things sometimes, but do get there eventually. Tried to get a fire pot from a mob in Texas but could not even get a reply out of them. You will have a lot of fun with your forge.

Cheers

Gordon
Keep yor  hoss well shod an' yor powdah dry !

Offline will payne

  • Sr. Member
  • ****
  • Posts: 349
  • AKA dead eye/ Coder /Ethical Hacker
Re: Fired Up My Old Forge
« Reply #16 on: June 22, 2018, 01:43:38 AM »
Don't get burned! Have fun with your forge.
🕯
Will


"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government." -Thomas Jefferson