« previous next »
Pages: [1]   Go Down

Author Topic: jaeger parts -  (Read 6491 times)

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
jaeger parts -
« on: May 28, 2009, 06:37:21 PM »

« Last Edit: May 28, 2009, 06:38:27 PM by jerrywh »
Logged
Nobody is always correct, Not even me.

George F.

  • Guest
Re: jaeger parts -
« Reply #1 on: May 28, 2009, 07:01:24 PM »
Boy Jerry, That's one detailed side plate. Must of been a nightmare to inlett. Perfect job!!, and love that rear sight.   ...Geo
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: jaeger parts -
« Reply #2 on: May 28, 2009, 07:09:40 PM »
Remarkable.  Delicious.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline t.caster

  • Hero Member
  • *****
  • Posts: 3730
Re: jaeger parts -
« Reply #3 on: May 28, 2009, 07:13:43 PM »
Exquisite! Parts for a 50k rifle?
Logged
Tom C.

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: jaeger parts -
« Reply #4 on: May 28, 2009, 07:21:14 PM »
I'm doing these parts for a customer. If it were mine it would be fancier.
Logged
Nobody is always correct, Not even me.

Offline Robby

  • Hero Member
  • *****
  • Posts: 2656
  • NYSSR ―
Re: jaeger parts -
« Reply #5 on: May 28, 2009, 07:36:39 PM »
Jerry, As always, beautiful stuff!! The sight looks like something must pivot, but I can't figure out what and why?? Probably me, been sick for a few weeks, could you show another view? Thanks, your work is always inspiring.
Robby
Logged
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline acorn20

  • Hero Member
  • *****
  • Posts: 541
Re: jaeger parts -
« Reply #6 on: May 28, 2009, 10:00:48 PM »
Beautiful work Jerry.  Neat looking rear sight.
Dan
Logged
Dan Akers

longrifle

  • Guest
Re: jaeger parts -
« Reply #7 on: May 28, 2009, 11:16:38 PM »
Wow !!! Fantastic Beautiful work.
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: jaeger parts -
« Reply #8 on: May 28, 2009, 11:29:25 PM »
That sideplate inlet is incredible. It is so well done. Wonderful fit.

Tom
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Leprechaun

  • Guest
Re: jaeger parts -
« Reply #9 on: May 29, 2009, 03:48:17 AM »
Quote from: Acer Saccharum on May 28, 2009, 11:29:25 PM
That sideplate inlet is incredible. It is so well done. Wonderful fit.

Tom

It's stuck on with double sided tape.....but the fit of the tape to the side plate is splendid ;D
Logged

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7018
Re: jaeger parts -
« Reply #10 on: May 29, 2009, 08:48:26 AM »
Jerry,
Those are magnificent!  Did you cast or chisel (or both) the sideplate?  I cannot tell from the photo, but is it polished steel or silver? I love the treatment of the screw heads.  They are creative, unusual, and superbly designed. Everything goes together without the slightest feeling of being too extravagant.
Someday, I am going to try and make a pistol in the style of Piraube and I will be coming back to these photos for inspiration.
I am in awe.

dave   
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Old Ford2

  • Hero Member
  • *****
  • Posts: 1102
Re: jaeger parts -
« Reply #11 on: May 29, 2009, 02:52:29 PM »
Sir,
My compliments!
May I ask, with such a delicate side plate, other than the lock screws, what holds such a fragile (looking) side plate in place?
I realize the inletting does, to a great degree.
But what stops it from curling?
Again, truly amazing?
I wish I had enough years left, to acquire such a beautiful talent.
Old Ford
Logged
Never surrender, always take a few with you.
Let the Lord pick the good from the bad!

Offline Don Getz

  • Hero Member
  • *****
  • Posts: 6853
Re: jaeger parts -
« Reply #12 on: May 29, 2009, 03:30:21 PM »
Jerry....just some ho-hum, run of the mill stuff for you, but so far above most of our abilities.   The only thing I would have done different would be the lock bolts.    I think nice domed head bolts that were heat blued would look great with all
that silver...........Don
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: jaeger parts -
« Reply #13 on: May 29, 2009, 07:55:50 PM »
Don and friends.
   I still have to case harden the screws and then I will temper and heat blue them. I didn't cast the side plate it is silver. I never had the time when he wanted it done. A gun maker friend and customer of mine had it cast and he did the inletting. His name is James Schultz. I am just doing some engraving and gold work on it for him. He also did the site except for the engraving. The original sight came from Track, I think.  It is one of their Jaeger sights.   This gun will most likely be at the Reno Engravers Guild show this next time. I will probably do the precious metal work on the Barrel and the lock. This gun will probably be worth $100,000.00 but it will never be for sale. It is going into Jims private collection.
   James Schultz is a very talented artist , a master wood carver, and a very good gun maker but not well known. He doesn't make guns for money. He only makes them for the love of the art and for himself. He has been at Reno before and shown some of his work. I think he learned a lot from Ron Scott.  He is a Dentist by trade.  Talent seems to be a common thing amongst dentists. For example . Bill Shipman, Terry Savage and James Schultz.
   I'm still working on my French double when I feel like it.
 
Logged
Nobody is always correct, Not even me.

Offline Robby

  • Hero Member
  • *****
  • Posts: 2656
  • NYSSR ―
Re: jaeger parts -
« Reply #14 on: May 30, 2009, 02:30:56 AM »
Jerry, I guess everyone, but me, understands the beautifully engraved plate that flips up behind and obscures the V notch in the sight blade. It is well done in the extreme, but I don't understand it. Could someone sate my curiosity?
Robby
Logged
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: jaeger parts -
« Reply #15 on: May 30, 2009, 06:02:39 AM »
Robby.
  I'll get another photo of it with the long range blade in the up position Soon.
Logged
Nobody is always correct, Not even me.
Pages: [1]   Go Up
« previous next »