« previous next »
Pages: [1]   Go Down

Author Topic: Where to get 1" 60 cal barrel  (Read 1409 times)

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2457
  • USAF vet 1971-1972 malmstrom afb,montana
Where to get 1" 60 cal barrel
« on: August 31, 2018, 05:00:50 PM »
Hi Friends, I have a build coming up for the winter, and am looking to use a 1" acf x 42 long.barrel,mostly to save weight for offhand shooting. It will be flint ignition. I have entertained making it a smoothie ,full octagon. Where can I find such a critter?
As always, I appreciate any help. Best regards, Dave f 8) 8)
Logged

Offline Ky-Flinter

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7468
  • Born in Kentucke, just 250 years late
Re: Where to get 1" 60 cal barrel
« Reply #1 on: August 31, 2018, 05:40:32 PM »
Call Charlie Burton, (6O6)78O-77O9, http://fcibarrels.tripod.com/

-Ron
« Last Edit: August 31, 2018, 05:41:19 PM by Ky-Flinter »
Logged
Ron Winfield

Life is too short to hunt with an ugly gun. -Nate McKenzie

Offline moleeyes36

  • Hero Member
  • *****
  • Posts: 1443
Re: Where to get 1" 60 cal barrel
« Reply #2 on: August 31, 2018, 06:04:07 PM »
Quote from: Ky-Flinter on August 31, 2018, 05:40:32 PM
Call Charlie Burton, (6O6)78O-77O9, http://fcibarrels.tripod.com/

-Ron


I second Ron's recommendation to contact Charlie Burton at FCI barrels.  Unless I'm reading the data wrong, his web sight indicates that 1 1/16 inch ATF would be required for a .60 caliber straight octagon barrel, but I don't think there would be much difference in weight from a 1 inch ATF flats barrel 42" long barrel.  You might consider going with a 38 inch long barrel in .60 caliber and 1 1/16 " ATF.  I suspect the weight would be about the same as a 1" ATF 42" long barrel in .60 caliber if it were available.  Something to think about.

Mole Eyes
Logged
Don Richards
NMLRA Field Rep, Instructor, Field Range Officer
NRA Chief Range Safety Officer

Offline snrub47

  • Full Member
  • ***
  • Posts: 117
Re: Where to get 1" 60 cal barrel
« Reply #3 on: August 31, 2018, 06:24:26 PM »
1in x42 60 cal. =6.35 lbs, 1 1/16=7.62 lbs.........weights for rifled barrels.
Logged

galudwig

  • Guest
Re: Where to get 1" 60 cal barrel
« Reply #4 on: August 31, 2018, 06:30:47 PM »
If you're not dead set on a straight-sided barrel, Rice has an Early Dutch Lancaster profile barrel that can be had in .60 cal. I picked one up in .60 cal. at Dixon's in July. It's 41" long, 1.3" at the breech and 1" at the muzzle. Slimmest proportion is at 0.850. They also have a Light Hagga profile that says can be had up to .62 cal. It's about 1.15 " at the breech, 1" at the muzzle with the slimmest proportion at .850.  I was going to have to wait on the Hagga profile, (at least a year), so I took the Early Dutch barrel since he had one sitting on the table.  Not sure of the weight, but it feels like it will be relatively light to carry around while hunting.
Logged

Offline moleeyes36

  • Hero Member
  • *****
  • Posts: 1443
Re: Where to get 1" 60 cal barrel
« Reply #5 on: August 31, 2018, 06:54:08 PM »
Quote from: snrub47 on August 31, 2018, 06:24:26 PM
1in x42 60 cal. =6.35 lbs, 1 1/16=7.62 lbs.........weights for rifled barrels.

Going to a 38" barrel in 1 1/16 would knock off nearly 3/4 of a pound.  Something to think about as would be considering a swamped barrel as galudwig suggested.

Mole Eyes
Logged
Don Richards
NMLRA Field Rep, Instructor, Field Range Officer
NRA Chief Range Safety Officer

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4339
Re: Where to get 1" 60 cal barrel
« Reply #6 on: August 31, 2018, 07:04:51 PM »
Ed Rayl would be the way to go!
Logged
John Robbins

Offline sqrldog

  • Hero Member
  • *****
  • Posts: 986
Re: Where to get 1" 60 cal barrel
« Reply #7 on: August 31, 2018, 07:24:24 PM »
I feel sure that a .60 in a 1" across the flats would be no problem. I have a Getz 1" x 42" in .62. The rifle Brian Barker just built for me has a Rice .60 swamped 42" long that starts at 1" at the breech. I'm  sure Jason would do it again.  I also think Charlie Burton or Ed Rayl would do the same as would Bobby Hoyt. You have several good barrel makers to choose from.
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Where to get 1" 60 cal barrel
« Reply #8 on: September 01, 2018, 02:31:54 AM »
I'd go swamped, no reason to fool around with a straight barrel these days unless the rifle you're doing requires it historically.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19450
    • GillespieRifles
Re: Where to get 1" 60 cal barrel
« Reply #9 on: September 01, 2018, 03:59:57 AM »
I totally agree with Mike. When I first started building flint locks I used straight barrels, did so for cost, ease on in letting etc. Once I used a swamped barrel I have not built a rifle with a straight barrel. The handle better,  balance better and best of all SELL better.
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline mountainman70

  • Hero Member
  • *****
  • Posts: 2457
  • USAF vet 1971-1972 malmstrom afb,montana
Re: Where to get 1" 60 cal barrel
« Reply #10 on: September 01, 2018, 04:17:49 AM »
I have a couple  flinters with 1" barrels, that are a bit heavy,and was thinking of a refit. I totally understand the rationale of swamped barrels, and have been getting a bit of good natured flack from a couple friends. I definitely like tapered barrels,so maybe I aint totally lost .
 Besides, I like that big ol hole in the end of a long rifle gun. Kinda like the side by side shotgun mystique. Have a goodun guys. Dave 8) 8)

I have a nice piece of curly and some parts, been thinking this is the one for a swamp thing !!
Logged
Pages: [1]   Go Up
« previous next »