Author Topic: Building a Fusil-de-Chasse (Read 3936 times)

Bill Raby · « **on:** August 21, 2018, 07:13:12 PM »

I just posted Part 8 of the series that I have been doing of building a fusil-de-chasse. In this one I inlet the main spring and drill the holes for the lock bolts through the stock and lock plate. I hope that you enjoy it. All comments are welcome.

Bill Raby · « **Reply #1 on:** August 24, 2018, 07:03:12 PM »

Here is Part 9. This 0ne is threading the lock plate and installing the trigger.

Bill Raby · « **Reply #2 on:** August 28, 2018, 06:49:29 PM »

I just put Part 10 up on You Tube. This one is putting in the tang bolt, installing the flash hole liner, and the front sight.

Bill Raby · « **Reply #3 on:** August 31, 2018, 06:50:32 PM »

Here is Part 11. This is getting into the metalwork.

Bill Raby · « **Reply #4 on:** September 04, 2018, 06:48:30 PM »

Here is Part 12.

Bill Raby · « **Reply #5 on:** September 07, 2018, 06:56:49 PM »

Here is Part 13. Installing buttplate and a bit on sharpening chisels.

Bill Raby · « **Reply #6 on:** September 10, 2018, 07:02:54 PM »

Here is Part 14. Taking some wood off the fore end and starting the entry pipe.

Bill Raby · « **Reply #7 on:** September 13, 2018, 07:05:33 PM »

Here is part 15. See just how ridiculously easy it is to inlet the entry pipe.

oldtravler61 · « **Reply #8 on:** September 14, 2018, 01:53:42 AM »

This would be a good tutorial for the builders of precarved kit guns.
Just a thought. Oldtravler

Bill Raby · « **Reply #9 on:** September 14, 2018, 03:19:50 AM »

Quote from: oldtravler61 on September 14, 2018, 01:53:42 AM

This would be a good tutorial for the builders of precarved kit guns.
Just a thought. Oldtravler

I suppose I could get in touch with one of the moderators once all of these are posted on You Tube.

Duane Harshaw · « **Reply #10 on:** September 15, 2018, 08:53:28 AM »

Bill, I sure enjoy watching these video's

Bill Raby · « **Reply #11 on:** September 15, 2018, 07:10:48 PM »

Glad to hear that you like them. I will have another one out on monday.

Bill Raby · « **Reply #12 on:** September 18, 2018, 03:09:46 AM »

Here is Part 16. Shaping the lock panel.

Bill Raby · « **Reply #13 on:** September 20, 2018, 06:50:28 PM »

Here is Part 17. Shaping the side panel and fore end.

Bill Raby · « **Reply #14 on:** September 24, 2018, 06:33:55 PM »

Here is Part 18. Carving the stock.

Bill Raby · « **Reply #15 on:** September 27, 2018, 01:10:03 PM »

Here is Part 19

Bill Raby · « **Reply #16 on:** October 01, 2018, 01:00:47 PM »

Here is Part 20. Trigger guard and some carving.

Bill Raby · « **Reply #17 on:** October 04, 2018, 01:09:55 PM »

Here is Part 21

Bill Raby · « **Reply #18 on:** October 08, 2018, 06:50:57 PM »

Here is Part 22. Finishing up a bunch of the small details. Almost finished.

Bill Raby · « **Reply #19 on:** October 11, 2018, 01:05:55 PM »

Here is Part 23. This is the last one. The gun is finished.

Davemuzz · « **Reply #20 on:** October 11, 2018, 01:40:27 PM »

Bill, thanks for posting the build and providing video. I haven't watched 'em all yet.....but that will happen!

Dave

News:

Author Topic: Building a Fusil-de-Chasse (Read 3936 times)

Davemuzz