Author Topic: My 1st attempt at a powder horn (Read 2568 times)

Mike Lyons · « **on:** November 18, 2018, 10:49:54 PM »

Here is my first horn finally completed. It is a screw tip based off of a couple examples of Northampton horns I found online. Thanks to Tim, Marc and everyone else for your advice. There is a lot of work that goes into these things.

Mike

kazi nazrul islam kobita

wattlebuster · « **Reply #1 on:** November 18, 2018, 10:55:57 PM »

I like it

snapper · « **Reply #2 on:** November 18, 2018, 10:58:32 PM »

looks like a keeper.

Great job

Fleener

hanshi · « **Reply #3 on:** November 19, 2018, 01:03:29 AM »

I think it's good looking.

Tim Crosby · « **Reply #4 on:** November 19, 2018, 01:21:42 AM »

Looks very well done Mike, looks like your off and run'n.

Tim

Greg Pennell · « **Reply #5 on:** November 19, 2018, 01:32:12 AM »

Nice! Ain’t this hobby awesome?

Greg

Huntschool · « **Reply #6 on:** November 19, 2018, 02:02:24 AM »

Real nice work Mike. Keep it up.

Marcruger · « **Reply #7 on:** November 19, 2018, 02:43:12 AM »

First horn? It looks quite professional. You can wear that one with justified pride. God Bless, Marc

Marcruger · « **Reply #8 on:** November 19, 2018, 02:44:41 AM »

My wife’s response was “Holy Moly!” That means she is impressed. 🙂

John SMOthermon · « **Reply #9 on:** November 19, 2018, 02:53:28 AM »

Great job!

mountainman70 · « **Reply #10 on:** November 19, 2018, 04:09:09 AM »

Great horn,and I expect no less. You catch on quick,pilgrim, ye will go far !!Happy Thanksgiving,bro. Dave

ps, I got my stuff from you.Thanks

smallpatch · « **Reply #11 on:** November 19, 2018, 04:35:30 AM »

Nicely done!

Tim · « **Reply #12 on:** November 19, 2018, 04:47:28 AM »

I like that powder horn.Great job!

Mike Lyons · « **Reply #13 on:** November 19, 2018, 07:13:43 AM »

Thanks for the compliments. I followed Tim Crosby’s tutorial. The thing is huge. It holds right under a pound of powder. The quality of the tutorials on this forum make it difficult to take credit. That little screw tip portion was quite expensive but I now have a lathe in case I ever need it.

Nordnecker · « **Reply #14 on:** November 19, 2018, 03:34:39 PM »

I like it, too. So, do you wish it was smaller?

Mike Lyons · « **Reply #15 on:** November 19, 2018, 07:32:20 PM »

Quote from: Nordnecker on November 19, 2018, 03:34:39 PM

I like it, too. So, do you wish it was smaller?

I like it large. I don't have to fill it as much.

PPatch · « **Reply #16 on:** November 19, 2018, 08:10:28 PM »

Oh, do take credit Mike - you obviously soaked up Tim's tutorial quite well. You know the old saying about leading a horse to water and not being able to make it drink? Well, you went to the well and drank the cool aid like a champ. Very nice job, may the horn serve you well.

dave

msellers · « **Reply #17 on:** November 19, 2018, 10:25:43 PM »

Mike, that is some fine work. Makes the little one I am plugging along at look pretty crummy. You do make some finestuff.
Mike

Pukka Bundook · « **Reply #18 on:** November 21, 2018, 10:42:02 PM »

That's a very nice horn, Afghanvet!

Sandy · « **Reply #19 on:** November 22, 2018, 06:30:12 PM »

Great job, Afghanvet!

Robby · « **Reply #20 on:** November 22, 2018, 09:27:36 PM »

Mighty fine Afghan, mighty fine!
Robby

Mark Elliott · « **Reply #21 on:** November 24, 2018, 11:32:00 PM »

That is a very nice horn. You would never know it was your first attempt. Tim provided me a lot of help also, when I started to make screw-tip horns.

News:

Author Topic: My 1st attempt at a powder horn (Read 2568 times)