Author Topic: Info on original English(?) cap lock.......  (Read 4851 times)

Offline Chuck Burrows

  • Hero Member
  • *****
  • Posts: 1218
    • Wild Rose Trading Company
Info on original English(?) cap lock.......
« on: May 20, 2009, 10:00:22 AM »
I'm trying to find some info on an original caplock marked Kingsland & Co., Warranted.
When in business especially????

Thanks for any help.......so far my references have come up nil.......
Two roads diverged in a wood, and I,
I took the one less traveled by,
And that has made all the difference.

Offline WElliott

  • Hero Member
  • *****
  • Posts: 593
Re: Info on original English(?) cap lock.......
« Reply #1 on: May 20, 2009, 06:17:21 PM »
Chuck, I'm on the same quest.  I have a Southern rifle with a flintlock marked  "R. Kingsland & Co., Warranted". and I and the previous owner have looked for information on this lock for years.  Hopefully, someone can help shed light on this lock maker.
Wayne
Wayne Elliott

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Info on original English(?) cap lock.......
« Reply #2 on: May 20, 2009, 06:29:51 PM »
Its probably an importer or hardware store name, not the actual maker.
The locks came over in bulk from various places. Birmingham for example, they were stamped either by the maker with the specified markings or by the person that bought them for resale.
So stop looking only for a maker and start looking for a supplier of parts, hardware store or importer.
Dan
He who dares not offend cannot be honest. Thomas Paine

Offline rsells

  • Hero Member
  • *****
  • Posts: 681
Re: Info on original English(?) cap lock.......
« Reply #3 on: May 20, 2009, 07:02:09 PM »
I have a late half stock target rifle with a lock marked Kingsland Warranted and tried to run the traps on the maker and didn't get far.  I did see one of these locks on one of the original Hawken rifles in the Cody museum.  I know it was used around 1860, but do not have any additional information.
                                                                        Roger

Offline WElliott

  • Hero Member
  • *****
  • Posts: 593
Re: Info on original English(?) cap lock.......
« Reply #4 on: May 20, 2009, 10:59:14 PM »
You are right, it is most likely the importer/distributor's name. Don't know why I said "maker", I know better!
Wayne
Wayne Elliott

millsman

  • Guest
Re: Info on original English(?) cap lock.......
« Reply #5 on: June 08, 2009, 10:00:22 PM »

Info from The Internet Gun Club    internetgunclub.com


Historical Data for Richards, Kingsland & C0
                       
Name Richards, Kingsland & Co.
Other Names   
Address 1   
Address 2   
Address 3   
Address 4   
Address 5   
Address 6   
Address 7   
City/Town New York
County   
State/Region/Province New York 
Country  USA 
Trade  Gunmakers 
Other Address   
Dates  1837 
Notes
No Notes Stored
Other Info
N/A
 
   
 
 

Offline WElliott

  • Hero Member
  • *****
  • Posts: 593
Re: Info on original English(?) cap lock.......
« Reply #6 on: June 09, 2009, 12:15:01 AM »
Thank you, Millsman.  That is most helpful.
Wayne
Wayne Elliott

Sean

  • Guest
Re: Info on original English(?) cap lock.......
« Reply #7 on: June 09, 2009, 03:36:59 AM »
Anybody have that 5 volume set on NY gunmakers?  Would be interesting to know if there's anything more in there.

Sean

Offline Steve Collward

  • Sr. Member
  • ****
  • Posts: 281
Re: Info on original English(?) cap lock.......
« Reply #8 on: June 09, 2009, 03:55:28 AM »
I checked out the New York State Firearms Trade books but found no listings for Kingsland.
Frank Sellers "American Gunsmiths" lists "Kingsland, R. & Co., unlocated. Lockmaker, flintlocks".
S. Collward