« previous next »
Pages: [1]   Go Down

Author Topic: Voids in German silver  (Read 2210 times)

Online sdilts

  • Sr. Member
  • ****
  • Posts: 433
Voids in German silver
« on: June 17, 2009, 03:02:57 AM »
I have been cleaning up a german silver pistol buttcap casting and several large voids have appeared. These are way too deep to file out and too large too peen closed. Is there anything that I could use to fill the voids?
Logged

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Voids in German silver
« Reply #1 on: June 17, 2009, 03:05:02 AM »
 Put inlays in them. Get some german silver and just inlay some in the holes.
Logged
Nobody is always correct, Not even me.

Online sdilts

  • Sr. Member
  • ****
  • Posts: 433
Re: Voids in German silver
« Reply #2 on: June 17, 2009, 03:11:57 AM »
Thanks Jerry, I'll give that a try.
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Voids in German silver
« Reply #3 on: June 17, 2009, 04:21:57 AM »
you can make rivets of german silver, drill a thru hole, and peen them in. Be sure to anneal the rivets first.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.
Pages: [1]   Go Up
« previous next »