« previous next »
Pages: [1]   Go Down

Author Topic: Re: barrel tennons  (Read 1808 times)

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: barrel tennons
« on: February 01, 2019, 04:40:32 PM »
  how deep should i go for barrel tennons on an "A" profile Allentown barrel 50 cal.
Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19483
    • GillespieRifles
Re: barrel tennons
« Reply #1 on: February 01, 2019, 04:58:54 PM »
I make mine .030".
Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: barrel tennons
« Reply #2 on: February 01, 2019, 05:24:53 PM »
Quote from: Dennis Glazener on February 01, 2019, 04:58:54 PM
I make mine .030".
Dennis
Ditto what Dennis said. 
David
Logged

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: barrel tennons
« Reply #3 on: February 01, 2019, 08:03:10 PM »
  THANKS GUYS!!!!!!!!!!!!!!
Logged

Offline Darrin McDonal

  • Sr. Member
  • ****
  • Posts: 477
Re: barrel tennons
« Reply #4 on: February 01, 2019, 10:18:05 PM »
Yes keep them very shallow and then take a flat chisel and bump up the dovetail areas slide the tanning in and then tap the raised area gently to secure it down.if there an ace in deep you've gone way- way too deep. That is absolutely completely unnecessary not to mention- leave the barrel wall is thick as you can.
Darrin
Logged
Apprentice Gunsmith
Colonial Williamsburg
Owner of Frontier Flintlocks

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Re: Re: barrel tennons
« Reply #5 on: February 01, 2019, 10:26:53 PM »
Be very careful.  That is a SKINNY barrel.  Double check the dimensions, if too thin, solder them, or very shallow, ( 15 or 20 thou) and then solder.  Especially the one in the waist.!
I just checked Rice webpage.
As far as I can tell, it will be a "B" weight barrel.  Not "A".  Still skinny!
« Last Edit: February 01, 2019, 10:32:00 PM by smallpatch »
Logged
In His grip,

Dane

Offline Jerry

  • Hero Member
  • *****
  • Posts: 559
Re: barrel tennons
« Reply #6 on: February 01, 2019, 11:33:56 PM »
Regardless of what weight barrel I'm using, I go .030 deep as with Dennis and David. When selecting tennons I try to get the ones with .030 thick flat with angles. 
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: barrel tennons
« Reply #7 on: February 02, 2019, 02:29:11 AM »
 Measurements, what are those?

   Tim C.
Logged

Offline Huntschool

  • Sr. Member
  • ****
  • Posts: 368
Re: barrel tennons
« Reply #8 on: February 02, 2019, 07:54:15 AM »
I do mine as smallpatch said....  under .030 (more like .020) and solder... works for me.
Logged
Bruce A. Hering
Program Coordinator/Lead Instructor (retired)
Shotgun Team Coach
Southeastern Illinois College
AMM 761
CLA

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: barrel tennons
« Reply #9 on: February 02, 2019, 07:44:39 PM »
  all done .035 deep hope its good, now to drill for pins.
Logged
Pages: [1]   Go Up
« previous next »