« previous next »
Pages: [1]   Go Down

Author Topic: Engraving Name on Barrel  (Read 1183 times)

Offline Mike Lyons

  • Hero Member
  • *****
  • Posts: 1242
  • Afghanvet
Engraving Name on Barrel
« on: April 22, 2019, 04:40:02 PM »
Is it standard practice to engrave your name on a barrel prior to browning or after?  I've looked at a lot of pictures and it just made it more confusing. 
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Engraving Name on Barrel
« Reply #1 on: April 22, 2019, 04:45:23 PM »
I always engrave prior to browning or bluing.
David
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Engraving Name on Barrel
« Reply #2 on: April 22, 2019, 06:53:13 PM »
Like David, I engrave prior to bluing/browning.  I had to engrave my name on a rifle that I browned first, and it worked out ok, but the little edges turned up from the cuts will now always be a rough spot, and the engraving itself, subject to rust.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline Pete G.

  • Hero Member
  • *****
  • Posts: 2013
Re: Engraving Name on Barrel
« Reply #3 on: April 23, 2019, 01:25:29 AM »
I engrave before finish in order to remove any burrs.
BTW to be read from lock side.
Logged

Offline Brian

  • Hero Member
  • *****
  • Posts: 6364
Re: Engraving Name on Barrel
« Reply #4 on: April 26, 2019, 09:22:55 PM »
Same here Pete.
Logged
"This is my word, and as such is beyond contestation"
Pages: [1]   Go Up
« previous next »