« previous next »
Pages: [1]   Go Down

Author Topic: after refereshing  (Read 2105 times)

ottawa

  • Guest
after refereshing
« on: July 04, 2009, 04:57:09 PM »
after the job of refreshing a barrel dose the breech plug need to be replaced or dose it matter how much freshing was done? the barrel for my daughters rifle is purty ruff and pitted  I'm going to try to fresh it out .
Logged

Offline sz

  • Hero Member
  • *****
  • Posts: 649
Re: after refereshing
« Reply #1 on: July 04, 2009, 05:06:29 PM »
As long as the threads are not cut away you'll be fine to use it "as is".

Logged

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5123
Re: after refereshing
« Reply #2 on: July 04, 2009, 06:20:22 PM »
Others will probably disagree, but you can stop as soon as the lands are clean.  Minor imperfections in the grooves are not that important to accuracy other than they tend to hold fouling more.
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: after refereshing
« Reply #3 on: July 04, 2009, 06:39:25 PM »
I'm gonna guess that if you're taking the grooves through the breechplug threads, you should go to the next size plug. If the grooves don't cut into the crests of the threads, you should be good to go.

Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.
Pages: [1]   Go Up
« previous next »