Author Topic: Spiral Horn (Read 2421 times)

Curtis Makamson · « **on:** September 29, 2019, 04:07:34 AM »

This small powder horn is 9 3/8 inches on the outside curve. It is 5 ¾ inches at its greatest circumference. It is to be carried in a pouch or pocket. The body of the horn is carved in a spiral manner consisting of eight individual spirals. Each spiral circles the circumference of the horn two times. The spirals continue onto the cherry base plug. No dye was applied. A stopper will eventually be turned for this little horn. Thanks for looking.

Bob McBride · « **Reply #1 on:** September 29, 2019, 04:59:38 AM »

Super super cool Curtis.

BTW, Your signature is like the thunder of judgement day to my ears. I may not sleep tonight....

Brokennock · « **Reply #2 on:** September 29, 2019, 05:50:14 AM »

Quote from: Bob McBride on September 29, 2019, 04:59:38 AM

Super super cool Curtis.

BTW, Your signature is like the thunder of judgement day to my ears. I may not sleep tonight....

I completely agree.

This part especially for me, ", prolific starter, paltry finisher." describes my whole life.

BruceH · « **Reply #3 on:** September 29, 2019, 01:16:39 PM »

Excellent workmanship. You have a keen eye for detail.

Frank Barker · « **Reply #4 on:** September 29, 2019, 02:29:59 PM »

WOW Curtis.... This is one of the most unique horns that I have ever seen. I don't think you will ever find another one quite like it. Thanks for sharing it with us.
Regards
Frank

Tim Crosby · « **Reply #5 on:** September 29, 2019, 03:44:55 PM »

Well done, Lots of work in that one.

Tim C.

Mark Elliott · « **Reply #6 on:** September 29, 2019, 03:52:39 PM »

All I can say is Wow! That was a tremendous amount of work.

vtmtnman · « **Reply #7 on:** September 29, 2019, 04:27:36 PM »

Nicely done.I can appreciate the work that went into that horn.

G. Elsenbeck · « **Reply #8 on:** September 29, 2019, 05:08:40 PM »

Very well done Curtis. You may have to change your signatures' self-proclamations though. Paltry finisher no longer applies, lol.

Greg Pennell · « **Reply #9 on:** September 29, 2019, 05:12:45 PM »

That is just so neat! Well done!

Greg

hanshi · « **Reply #10 on:** September 29, 2019, 11:36:56 PM »

In my short life I've seen a pregnant woman climb a pine tree, a house cat put a whoopin' on a pit bull, a lizard walk on water, a whitetail deer steal a cookie from the hand of a toddler, a lawyer with his hands in his own pockets, a young crow swallow a baby spoon and a red fox vs kitty cat staring match. But in all that time I have NEVER seen anything like that there spiral horn.

R.J.Bruce · « **Reply #11 on:** September 30, 2019, 12:09:05 PM »

I have only one word for this horn.

STUNNING!!!!!!!!!

Impeccable workmanship.

R.J.Bruce

Tony N · « **Reply #12 on:** September 30, 2019, 09:16:25 PM »

Beautiful work! Stunning

~Tony

kudu · « **Reply #13 on:** September 30, 2019, 11:04:57 PM »

all that comes to mind is "Jeepers"

skillman · « **Reply #14 on:** October 01, 2019, 03:57:18 AM »

Curtis's work can be spotted from clear across the country. He's the master of the spiral horn.

Steve

BOB HILL · « **Reply #15 on:** October 01, 2019, 04:19:29 PM »

Now that's a lot of work. Great job.
Bob

Bull Shannon · « **Reply #16 on:** October 02, 2019, 08:15:21 AM »

That is the most unique style of horn carving I've ever seen! That you for sharing your work, it should certainly inspire others.

Marcruger · « **Reply #17 on:** October 02, 2019, 05:45:44 PM »

Simply amazing. Both concept and execution. God bless, Marc

Brian · « **Reply #18 on:** October 04, 2019, 08:32:41 PM »

I can't even imagine the amount of work and patience that went into that. Amazing!

aaronc · « **Reply #19 on:** October 05, 2019, 08:39:04 AM »

Really nice work.

old george · « **Reply #20 on:** October 05, 2019, 05:40:53 PM »

Just speechless

geo

News:

Author Topic: Spiral Horn (Read 2421 times)

Curtis Makamson