« previous next »
Pages: [1]   Go Down

Author Topic: Tinned Powder Measure  (Read 2051 times)

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Tinned Powder Measure
« on: December 28, 2019, 08:58:21 AM »
Ok, so I couldn't find the thread I was remembering. So here is a tinned steel measure I just finished up. It was inspired by one I saw for sale on Ebay that was supposedly dug at Ft. Ticonderoga. Making it a Revolutionary War era style. I couldn't help but try my hand at making one similar for a trade rifle I am slowly building. I welcome your feedback, and thoughts on it. It holds roughly 90grs of 3f. Am planning to keep perfecting my design, and make more of these in different sizes.
Mike












Logged

Offline Notchy Bob

  • Sr. Member
  • ****
  • Posts: 252
Re: Tinned Powder Measure
« Reply #1 on: December 28, 2019, 03:06:20 PM »
Nice work!  I've never actually seen an original, though.  Is the hexagonal cross-section typical?

Thanks for posting!

Notchy Bob
Logged
"Should have kept the old ways just as much as I could, and the tradition that guarded us.  Should have rode horses.  Kept dogs."

from The Antelope Wife

Offline jackley

  • Starting Member
  • *
  • Posts: 32
Re: Tinned Powder Measure
« Reply #2 on: December 28, 2019, 04:12:43 PM »
That's COOL!!  You need to do a tutorial on this.
Logged

Offline MuskratMike

  • Hero Member
  • *****
  • Posts: 2263
Re: Tinned Powder Measure
« Reply #3 on: December 28, 2019, 06:23:10 PM »
Yes sir! That is a fine looking measure.
Logged
"Muskrat" Mike McGuire
Keep your eyes on the skyline, your flint sharp and powder dry.

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Tinned Powder Measure
« Reply #4 on: December 28, 2019, 06:55:12 PM »
Quote from: Notchy Bob on December 28, 2019, 03:06:20 PM
Nice work!  I've never actually seen an original, though.  Is the hexagonal cross-section typical?

Thanks for posting!

Notchy Bob
All the ones, I have seen were round. However, when I saw the hexagonal one. I had to try my hand at it. An old collector shared some insight into them. Some of his favorite pieces were tinned, then had a wooden plug fit to the base. Will track down some information if I can and share.
Mike
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Tinned Powder Measure
« Reply #5 on: December 28, 2019, 10:01:53 PM »
Very neat. My only suggestion would be to make sure the measure is comparable in diameter to the gun bore size, thereby easing pouring the charge in the bore. God bless, Marc
Logged

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Tinned Powder Measure
« Reply #6 on: December 28, 2019, 10:50:33 PM »
Quote from: Marcruger on December 28, 2019, 10:01:53 PM
Very neat. My only suggestion would be to make sure the measure is comparable in diameter to the gun bore size, thereby easing pouring the charge in the bore. God bless, Marc
Is for my 50 and up, so not a problem there. If I cut an angle into it with a corner forming a vee.  It would pour easily into just about any caliber one wanted.
Mike
Logged

Offline Kevin

  • Sr. Member
  • ****
  • Posts: 484
Re: Tinned Powder Measure
« Reply #7 on: December 29, 2019, 05:37:53 AM »
Nice work all around.  Thanks for sharing,

Kevin
Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: Tinned Powder Measure
« Reply #8 on: December 29, 2019, 02:38:32 PM »
Nice design, Mike. I like the shape. Thanks for posting.
 Bob
Logged
South Carolina Lowcountry

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Re: Tinned Powder Measure
« Reply #9 on: December 29, 2019, 04:31:26 PM »
  Good look'n measure, well done.

    Tim
Logged

Offline Mick C

  • Sr. Member
  • ****
  • Posts: 423
Re: Tinned Powder Measure
« Reply #10 on: December 29, 2019, 11:01:05 PM »
Love it! Very unique.
Logged
My profile picture is my beloved K9 best friend and soulmate, Buster Brown, who passed away in 2018.  I miss you buddy!

Offline sa_handforged

  • Starting Member
  • *
  • Posts: 31
Re: Tinned Powder Measure
« Reply #11 on: December 31, 2019, 05:14:15 PM »
Looking good !
I am inspired by your work here and must try my hand at something along these lines for a winter nights project.

Looking forward to seeing the finished design.
Logged

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Tinned Powder Measure
« Reply #12 on: January 18, 2020, 03:01:25 AM »
Quote from: jackley on December 28, 2019, 04:12:43 PM
That's COOL!!  You need to do a tutorial on this.
I will attempt to do a tutorial on this when I make up some more of them.
Logged
Pages: [1]   Go Up
« previous next »