Author Topic: Thinning Permalyn finish  (Read 1974 times)

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 428
Thinning Permalyn finish
« on: July 07, 2020, 04:02:26 AM »
I have a bottle of Permalyn finish that I would like to thin down to use as a sealer. I thought I had some sealer but it turned out to be the finish. Anyway, what should I use to thin it?

Offline john bohan

  • Sr. Member
  • ****
  • Posts: 339
Re: Thinning Permalyn finish
« Reply #1 on: July 07, 2020, 03:20:59 PM »
check perymalyn's web site I think they will say mineral sprits. I have used many times.

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4092
  • Dane Lund
Re: Thinning Permalyn finish
« Reply #2 on: July 07, 2020, 05:04:42 PM »
When I used to use Permalyn, (it is a fine product) I found the shelf life of a partial used can was very short.  If it’s thickened, you may have trouble getting it to dry.
I’d throw it away, and buy a new can.
In His grip,

Dane

Offline Scota4570

  • Hero Member
  • *****
  • Posts: 2342
Re: Thinning Permalyn finish
« Reply #3 on: July 07, 2020, 06:31:17 PM »
When I used to use Permalyn, (it is a fine product) I found the shelf life of a partial used can was very short.  If it’s thickened, you may have trouble getting it to dry.
I’d throw it away, and buy a new can.

Here is the solution to that problem:
http://www.bloxygen.com

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2203
Re: Thinning Permalyn finish
« Reply #4 on: July 07, 2020, 07:10:00 PM »
When I used to use Permalyn, (it is a fine product) I found the shelf life of a partial used can was very short.  If it’s thickened, you may have trouble getting it to dry.
I’d throw it away, and buy a new can.

Here is the solution to that problem:
http://www.bloxygen.com

I use that product and it works. ;)
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4092
  • Dane Lund
Re: Thinning Permalyn finish
« Reply #5 on: July 07, 2020, 10:10:50 PM »
Kinda late for this can.
In His grip,

Dane

Offline dogsbreath

  • Starting Member
  • *
  • Posts: 7
Re: Thinning Permalyn finish
« Reply #6 on: July 07, 2020, 11:36:42 PM »
I'm going off subject here, but consider marbles as a filler to bring the liquid level to the top of the can. Their cheap. When your done with the can dump them in thinner,clean them up and give em to the grand kids. Since they don't us batteries they won't have a clue what to do with em.

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 428
Re: Thinning Permalyn finish
« Reply #7 on: July 08, 2020, 03:23:03 AM »
Interestingly, I was on LMF's website and they stated that Permalyn finish does not skin over. They must have changed something because it has always skinned over on me. That's why I started using Bloxygen. That stuff works! The finish I was using was a brand new can, I was just wanting to thin it down to the consistency of their sealer. Their website does not mention anything about thinning it.

Offline FDR

  • Sr. Member
  • ****
  • Posts: 330
Re: Thinning Permalyn finish
« Reply #8 on: July 08, 2020, 09:44:40 PM »
I have always used mineral spirits as a thinner. Real mineral spirits not the odorless kind.

Fred

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 428
Re: Thinning Permalyn finish
« Reply #9 on: July 09, 2020, 03:36:34 AM »
Looks like a trip to the hardware store for mineral spirits.