« previous next »
Pages: [1]   Go Down

Author Topic: Great start to Independence Day.  (Read 2045 times)

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Great start to Independence Day.
« on: July 04, 2020, 11:55:17 PM »
Had a couple of friends over this morning and we cast up a Dutch D guard for an upcoming New England fowler project.  Had to make my own as this wil be a boys size fowler.  I am using a 33" long oct/rd .40 smooth bore barrel from Charlie Burton inlet into a piece of cherry.  The buttplate was swaged from 1/16" sheet brass in the Dutch style as well.  Next up is the side plate.  Don't know if I will get ambitious and cast it as well or just cut it out of sheet brass.  Kind of leaning towards casting it.
David
 



Logged

Offline eggwelder

  • Jr. Member
  • **
  • Posts: 68
Re: Great start to Independence Day.
« Reply #1 on: July 05, 2020, 02:28:48 AM »
Nice work. Aspiring to casting brass.
I do a fair bit of aluminum casting, managed to make Aluminum bronze once. That stuff won`t even respond to a file.
I kind of envy the guys who can cast brass, something i am planning on trying eventually.
 It will come i guess.
Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: Great start to Independence Day.
« Reply #2 on: July 05, 2020, 02:40:33 PM »
Those look great, David.
Bob
Logged
South Carolina Lowcountry

Offline Angus

  • Full Member
  • ***
  • Posts: 211
Re: Great start to Independence Day.
« Reply #3 on: July 05, 2020, 02:45:01 PM »
Very nice. What alloy of brass and about how much do you suppose was in the crucible?
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Great start to Independence Day.
« Reply #4 on: July 05, 2020, 04:10:53 PM »
You could have sent those patterns over to me and saved alot of work. Gluten for punishment....
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Great start to Independence Day.
« Reply #5 on: July 05, 2020, 05:13:35 PM »
Quote from: Angus on July 05, 2020, 02:45:01 PM
Very nice. What alloy of brass and about how much do you suppose was in the crucible?
I am using 70/30 brass nuggets.  I us an A2 graphit/clay crucible.  It will hold 5 1/2 lbs of brass.  I normally fill the crucible about half full and after the pour I end up filling a couple of ingot cavities in a Lyman ingot mold with the excess brass.  It takes more brass to fill the spru and runners than the actual triggerguard or buttplate.
David
 
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Great start to Independence Day.
« Reply #6 on: July 05, 2020, 05:16:15 PM »
Quote from: Mike Brooks on July 05, 2020, 04:10:53 PM
You could have sent those patterns over to me and saved alot of work. Gluten for punishment....
Yes, I could have, but then I would not have been able to impressed my friends.  8)
David
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Great start to Independence Day.
« Reply #7 on: July 06, 2020, 12:12:07 AM »
Quote from: David Rase on July 05, 2020, 05:16:15 PM
Quote from: Mike Brooks on July 05, 2020, 04:10:53 PM
You could have sent those patterns over to me and saved alot of work. Gluten for punishment....
Yes, I could have, but then I would not have been able to impressed my friends.  8)
David
And that is what life is all about!     ;)
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1394
Re: Great start to Independence Day.
« Reply #8 on: July 08, 2020, 04:12:12 AM »
Dave that trigger guard really looks nice.
Logged

Offline Clint

  • Sr. Member
  • ****
  • Posts: 330
Re: Great start to Independence Day.
« Reply #9 on: July 14, 2020, 05:46:10 AM »
Casting your own butt plates or trigger guards IS a lot of work, especially if you make the patterns. When you break the mold on a good pour, the gratification is worth the work.
Logged

Offline Mike Lyons

  • Hero Member
  • *****
  • Posts: 1242
  • Afghanvet
Re: Great start to Independence Day.
« Reply #10 on: July 14, 2020, 06:48:39 AM »
Nice work David.  Can’t wait to see this one completed. 
Logged
Pages: [1]   Go Up
« previous next »