« previous next »
Pages: [1]   Go Down

Author Topic: vent liner repair  (Read 1427 times)

Offline sghart3578

  • Starting Member
  • *
  • Posts: 38
vent liner repair
« on: October 26, 2020, 01:16:47 AM »
Hello friends,

I picked up a used rifle recently.  It is a .54 cal flintlock, sort of a Southern poor boy style.  I like it very much.

It has a Siler lock and a Green Mountain barrel

The vent liner was screwed in too deep and it made it impossible to clean the breech face.  I tried to remove it but I made a mess of things.

Who would you recommend that I turn to for help?

Thanks in advance,

Steve in N CA
Logged

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2913
Re: vent liner repair
« Reply #1 on: October 26, 2020, 01:26:35 AM »
It should not be that big of a problem. Drill out the liner just large enough for a screw extractor to fit and simply unscrew it. If you lived next door to me we could do it in ten minutes.
Logged
Stop Marxism in America

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: vent liner repair
« Reply #2 on: October 26, 2020, 01:30:27 AM »
It sounds as though the length was never trimmed. I’d remove the breechplug and take a good look. You can probably use a half round needle file to carefully remove the excess.
Logged
Andover, Vermont

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: vent liner repair
« Reply #3 on: October 26, 2020, 03:38:09 PM »
The good news is that if you feel it is too much for you to do, you only have to ship the barrel to a gunmaker for revisions, not the whole gun.   God Bless,   Marc
Logged

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5565
Re: vent liner repair
« Reply #4 on: October 29, 2020, 07:25:05 PM »
 It wouldn’t be the first vent liner, or breech plug for that matter, that I have encountered with loc-tite on the threads. A close inspection with a magnifying glass for a tell tale ring of red wouldn’t hurt.

  Hungry Horse
Logged
Pages: [1]   Go Up
« previous next »