« previous next »
Pages: [1]   Go Down

Author Topic: versitile clamp #304  (Read 1502 times)

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
versitile clamp #304
« on: January 01, 2021, 04:46:49 AM »
This clamp really holds tight and it will not mar the steel or deform it.  2 steel rods .150 in diameter hold the aluminum bars together and in alignment. This clamp is also a good heat sink for welding pieces like this. The silver decoration on the front of the trigger guard is soldered with three different temps. of solder and the lowest temp solder is 450 degrees. When this is done the trigger guard will be niter blued. The temp for bluing will be close to 600F and the silver part must not come unsoldered. Go figure. Make one you will love it.





Logged
Nobody is always correct, Not even me.

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 854
Re: versitile clamp #304
« Reply #1 on: January 01, 2021, 07:23:15 AM »
That’s a slick idea...thanks for sharing and hope you have a healthy and fun new year.
Cheers Richard
Logged

Offline t.caster

  • Hero Member
  • *****
  • Posts: 3729
Re: versitile clamp #304
« Reply #2 on: January 01, 2021, 07:30:11 AM »
Good idea! Thanks!
Logged
Tom C.

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: versitile clamp #304
« Reply #3 on: January 01, 2021, 08:58:47 AM »
Thanks for the post Jerry, I will have to make one of those and put it to use.



Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: versitile clamp #304
« Reply #4 on: January 01, 2021, 05:11:27 PM »
Thanks for this great tip, Jerry.
Bob
Logged
South Carolina Lowcountry

Offline heinz

  • Hero Member
  • *****
  • Posts: 1158
Re: versitile clamp #304
« Reply #5 on: January 01, 2021, 06:09:51 PM »
Great idea.  I m going to try one with 1.5-inch wooden dowels for some brass work.
Logged
kind regards, heinz
Pages: [1]   Go Up
« previous next »