Author Topic: Locks I may be able to copy.  (Read 1253 times)

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3440
Locks I may be able to copy.
« on: January 27, 2021, 06:29:09 PM »
Gents,
I think I could manage a copy of these locks.
Note the sear arrangement!
First pictures are of a lock from Finland, 1880's...but going way back.
Second lock, no idea.
Neither are mine.










Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19477
Re: Locks I may be able to copy.
« Reply #1 on: January 27, 2021, 06:56:00 PM »
Remarkable in their simplicity. Sort of matchlocks, updated just a bit.
Andover, Vermont

Offline Elnathan

  • Hero Member
  • *****
  • Posts: 1773
Re: Locks I may be able to copy.
« Reply #2 on: January 27, 2021, 08:24:07 PM »
Adaptations of the Scandinavian-Siberian snaplock mechanism to percussion ignition. It might be possible to narrow down the origin of the unknown one based on the way the spring pushes up instead of down on the hammer - there were regional variations in the way this was accomplished, but but I don't know what they were.

There doesn't seem to be much on Scandinavian and Siberian-Russian weapons in English. This is a pity, because as far as I can tell these areas were one of the few places on the Eurasian continent that rural common folks could hunt and trap for fun and subsistence, so these guns, despite the very different design, filled much the same roles as did the longrifle over here.
A man can never have too much red wine, too many books, or too much ammunition -  Rudyard Kipling

Offline flatsguide

  • Hero Member
  • *****
  • Posts: 846
Re: Locks I may be able to copy.
« Reply #3 on: January 28, 2021, 03:50:46 PM »
What did the complete rifle or gun look like?
Richard

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3440
Re: Locks I may be able to copy.
« Reply #4 on: January 28, 2021, 05:22:16 PM »
Richard,

Top lock is froma Finnish small -bore hunting rifle.
Cheek stock of a rather strange shape.  Bore between 7 and 8 mm.


dice roller 5e









Offline flatsguide

  • Hero Member
  • *****
  • Posts: 846
Re: Locks I may be able to copy.
« Reply #5 on: January 28, 2021, 05:49:57 PM »
What a strange looking gun. I wonder if it was meant to be fired from other than the shoulder.
Richard

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3440
Re: Locks I may be able to copy.
« Reply #6 on: January 28, 2021, 06:20:55 PM »
It's a cheek stock, Richard.
Very cumbersome looking 'cheek' to it though.

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9680
Re: Locks I may be able to copy.
« Reply #7 on: January 28, 2021, 06:40:32 PM »
Looks like someone was smoking something we never had any of ;D

Bob Roller

Offline vanu

  • Full Member
  • ***
  • Posts: 190
Re: Locks I may be able to copy.
« Reply #8 on: January 28, 2021, 07:00:35 PM »
Awesome! Would look great with your matchlock from a few years ago!

Bruce