Author Topic: Got it done today  (Read 2638 times)

Eseabee1

  • Guest
Got it done today
« on: March 11, 2021, 12:49:06 AM »
Got the horn done today that I started with yesterday. I normally finish a horn a day but decided to slow down a little. Very simple horn 13 1/2 inches outside curve with two bands and a horn spout. The base plug is 2 3/8 inch diameter and is hollowed out. The base is curly maple dye with walnut stain and finished with bear grease and beeswax. Can be carried left or right side.




Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: Got it done today
« Reply #1 on: March 11, 2021, 01:13:31 AM »
That’s a good looking horn!
Andover, Vermont

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Got it done today
« Reply #2 on: March 11, 2021, 02:06:23 AM »
Ditto what Rich said.  Well done and welcome back to all the horn dust that settles around the shop. 
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline Keith Zimmerman

  • Hero Member
  • *****
  • Posts: 711
Re: Got it done today
« Reply #3 on: March 11, 2021, 05:43:12 AM »
I like it.

Offline Frank Barker

  • Hero Member
  • *****
  • Posts: 575
Re: Got it done today
« Reply #4 on: March 11, 2021, 07:54:47 AM »
WOW Eseabee1 That is a beautiful horn, I like the color and the horn fittings. Very Nice.....

Eseabee1

  • Guest
Re: Got it done today
« Reply #5 on: March 11, 2021, 09:45:58 AM »
Thank you everyone. Did not know how things were gonna to be returning to making horns after so long away. It feels great going to be pushing myself to making some different stuff in between powder horns.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Got it done today
« Reply #6 on: March 11, 2021, 03:42:54 PM »
 Well you sure fell right back in. I remember when you used to post a horn one day that you made the day or night before. Great work as always, look forward to seeing more.

   Tim

PS: It didn't last long either ;) TC
« Last Edit: March 11, 2021, 04:01:48 PM by Tim Crosby »

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Got it done today
« Reply #7 on: March 11, 2021, 08:40:05 PM »
I really like that horn!   I like the asymetrical nature of it and how it works with the base plug and base band matching and then the small band and the tip matching.   The color is also great!

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Got it done today
« Reply #8 on: March 11, 2021, 09:19:53 PM »
That's a great looking horn!
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Eseabee1

  • Guest
Re: Got it done today
« Reply #9 on: March 12, 2021, 02:36:13 AM »
I really like that horn!   I like the asymetrical nature of it and how it works with the base plug and base band matching and then the small band and the tip matching.   The color is also great!
Thanks Mark I thought I would forget a few things after that many years away.

Eseabee1

  • Guest
Re: Got it done today
« Reply #10 on: March 12, 2021, 02:38:45 AM »
Well you sure fell right back in. I remember when you used to post a horn one day that you made the day or night before. Great work as always, look forward to seeing more.

   Tim

PS: It didn't last long either ;) TC
Have to slow down a little bit for now. Was planing on working in my out I. The shop today but water heater had other plans. So tomorrow working on a different type of horn container.

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Got it done today
« Reply #11 on: March 13, 2021, 04:30:01 AM »
That is a beautiful horn. Great architecture.
Bob
South Carolina Lowcountry

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Got it done today
« Reply #12 on: March 13, 2021, 05:08:59 AM »
Looks good Ed. Good to see you're back in the shop.

Steve
Steve Skillman

Fred Hembree

  • Guest
Re: Got it done today
« Reply #13 on: March 15, 2021, 01:12:47 AM »
Nice job...beautiful horn.