Author Topic: Horn W/A Screw Tip & Butt  (Read 1139 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Horn W/A Screw Tip & Butt
« on: March 31, 2021, 04:50:19 PM »
 Certainly not necessary but both ends are threaded, I guess I could pin the tip. It is about 16" around the outside curve and 13 tip-to-tip. If I remember right the butt is Maple, either that or it is Cherry it is about 2 1/2" held in by four wooden pegs, it is tapped 1/2-6 for the Walnut finial. The tip is one piece of cow horn threaded 5//8-11. Color on the Horn and tip is AF, the butt has some kind of stain on it, followed by Brown wax.

  Tim C.














Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Horn W/A Screw Tip & Butt
« Reply #1 on: March 31, 2021, 04:53:14 PM »
I particularly like the turning on the tip.

vandeusen1987

  • Guest
Re: Horn W/A Screw Tip & Butt
« Reply #2 on: March 31, 2021, 06:30:30 PM »
Good lookin horn! I have yet to get walnut to thread like that...ive had good luck tapping my walnut butt plugs though

Offline Jim Spray

  • Full Member
  • ***
  • Posts: 226
Re: Horn W/A Screw Tip & Butt
« Reply #3 on: March 31, 2021, 06:40:14 PM »
Very nice lathe work on both ends Tim. Nice color!!

Jim

Online David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Horn W/A Screw Tip & Butt
« Reply #4 on: March 31, 2021, 07:42:31 PM »
Pretty nice there Tim.
David

Eseabee1

  • Guest
Re: Horn W/A Screw Tip & Butt
« Reply #5 on: April 01, 2021, 05:19:25 AM »
Good looking horn Tim

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Horn W/A Screw Tip & Butt
« Reply #6 on: April 01, 2021, 12:42:26 PM »
Very nice, Tim.
Bob
South Carolina Lowcountry

Offline Bonnie54

  • Jr. Member
  • **
  • Posts: 58
Re: Horn W/A Screw Tip & Butt
« Reply #7 on: April 01, 2021, 01:49:06 PM »
Wow! Very nice Mr. Crosby
Brett Davis