« previous next »
Pages: [1]   Go Down

Author Topic: UNDER RIB  (Read 1341 times)

Offline jim alford

  • Full Member
  • ***
  • Posts: 108
UNDER RIB
« on: August 12, 2021, 05:27:54 PM »
I am looking for a under rib for a 3/4" barrel for a upcoming project. All I can find are for 13/16" and larger. Any ideas????
Logged

Offline snrub47

  • Full Member
  • ***
  • Posts: 117
Re: UNDER RIB
« Reply #1 on: August 12, 2021, 08:24:11 PM »
Have you called Muzzleloader Builders Supply?? They may have what you are looking for.
Logged

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: UNDER RIB
« Reply #2 on: August 13, 2021, 12:31:34 AM »
Well a rib for a 13/16 barrel would only be a 32nd of an inch or less too big on each side max. A couple licks with a file should get you real close
Logged

Offline jim alford

  • Full Member
  • ***
  • Posts: 108
Re: UNDER RIB
« Reply #3 on: August 13, 2021, 01:02:51 AM »
That might be my only option.
Logged

Offline jim alford

  • Full Member
  • ***
  • Posts: 108
Re: UNDER RIB
« Reply #4 on: August 13, 2021, 03:12:50 AM »
Another point is that they are 1/4" deep and I am not sure how that would look in proportion with only a 3/4" barrel,
« Last Edit: August 13, 2021, 11:20:37 PM by Dale Halterman »
Logged

Offline jim alford

  • Full Member
  • ***
  • Posts: 108
Re: UNDER RIB
« Reply #5 on: August 13, 2021, 07:55:12 AM »
The above should read 3/4" barrel.

(Fixed it for you. Dale H, your friendly moderator)
« Last Edit: August 13, 2021, 11:22:03 PM by Dale Halterman »
Logged

Offline B.Habermehl

  • Hero Member
  • *****
  • Posts: 1690
Re: UNDER RIB
« Reply #6 on: August 13, 2021, 11:13:19 PM »
Your rib thickness should match your web thickness in your remaining fore stock. With that small a barrel I would not have a rib more than 3/16 thick maybe 5/64. You can fabricate that from hardware store stock. BJH
Logged
BJH
Pages: [1]   Go Up
« previous next »