« previous next »
Pages: [1]   Go Down

Author Topic: Gadrooning  (Read 1214 times)

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 557
    • D Fruth Flintlocker
Gadrooning
« on: December 12, 2021, 05:24:45 AM »
Is gadrooning, for example on a muzzle cap, stamped into the brass, then formed, or filed after the cap is installed?
Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7910
Re: Gadrooning
« Reply #1 on: December 12, 2021, 07:38:43 AM »
I will make a guess and say both. Just depends on the person doing the building, his tools and training. Again, only a guess.
Logged

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
Re: Gadrooning
« Reply #2 on: December 12, 2021, 02:49:47 PM »
Dan,  I had intimate contact with a Frederick Sell that had a chevroned nose cap and that was achieved by filing.   Modern made chevroned nose caps are stamped, a manufacturing expedient.  I don't think you would go wrong with filing the nosecap.

Ron
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19541
Re: Gadrooning
« Reply #3 on: December 12, 2021, 04:15:15 PM »
I’d hate to inlet a stamped one.
Logged
Andover, Vermont

Offline heinz

  • Hero Member
  • *****
  • Posts: 1158
Re: Gadrooning
« Reply #4 on: December 12, 2021, 06:11:16 PM »
Dan, here is how I formed the thimbles for the Granddaughter's Jaeger.  Apologize for the poor photo quality/. The layout starts out as straight cuts.  Bending the metal is what introduces the curved look.  It would be a dit more complicated with the V shape required fora nose cap but basically the same.  The stencil for laying out the cuts could be used to layout the inletting line on the nose.  You can pick out the original :-)















Logged
kind regards, heinz
Pages: [1]   Go Up
« previous next »