« previous next »
Pages: [1]   Go Down

Author Topic: Barrel finish?  (Read 1325 times)

Offline Granville

  • Starting Member
  • *
  • Posts: 8
Barrel finish?
« on: May 05, 2022, 04:58:36 PM »
Can anybody tell me what the original finish was on 1850-70's, Damascus steel double barrel shotguns? Thanks
Logged

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2257
  • Oklahoma
Re: Barrel finish?
« Reply #1 on: May 05, 2022, 05:18:22 PM »
High polish browned
Logged
Psalms 144

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15825
Re: Barrel finish?
« Reply #2 on: May 06, 2022, 02:48:41 AM »
Exactly - at least all the ones I have seen.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3465
Re: Barrel finish?
« Reply #3 on: May 07, 2022, 03:33:10 PM »
The brown wasn't just a plum brown, but an acid concoction that rusted the iron and steel at different rates, bringing out the twist, whether a stub iron or a true "Damascus".
Just making this point in case anyone read this and gummed up their nice twist barrels with a modern commercial brown.
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15825
Re: Barrel finish?
« Reply #4 on: May 07, 2022, 06:58:24 PM »
Someone here has done a perfect job on twist steel barrels, or perhaps it was on the NE forum?
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline J.M.Browning

  • Full Member
  • ***
  • Posts: 179
Re: Barrel finish?
« Reply #5 on: May 08, 2022, 01:27:02 AM »


Hope this helps .
Logged
Thank you Boone , Glass with all the contemplate I read with todays (shooter's lightly taken as such) , you keep things simple .

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 556
    • D Fruth Flintlocker
Re: Barrel finish?
« Reply #6 on: May 08, 2022, 02:50:42 PM »
The double gun journal had an excellent how to for your barrels. PM me and I'll send you a copy. It requires rusting, carding, and etching in acid, several times to achieve the proper finish. This was the process used back when your gun was new. Here is a photo of a double I just finished with a plum brown instead of dark blue.


Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3465
Re: Barrel finish?
« Reply #7 on: May 08, 2022, 04:30:05 PM »
Lovely job, Dan!
Is that a two stripe Damascus?

Double Gun is a very valuable resource for this type of stuff!!

Here's an old percussion, been re-done of course...


Stub twist in this case.
Logged

Online smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7013
Re: Barrel finish?
« Reply #8 on: May 09, 2022, 01:26:38 AM »
Hi,
Here is a great Mortimer stub twist.











dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Granville

  • Starting Member
  • *
  • Posts: 8
Re: Barrel finish?
« Reply #9 on: May 11, 2022, 01:46:46 PM »
Thanks for the information and the photographs. It was well received. Joe from NC.
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Barrel finish?
« Reply #10 on: May 11, 2022, 08:31:16 PM »
I recently studied a drilling, with damascus (not twist) shotgun barrels and a rifle barrel underneath.  The gun was in original finish.  The shotgun barrels were browned, and the rifle barrel was polished blue.  I found that interesting.   
Logged
Pages: [1]   Go Up
« previous next »