« previous next »
Pages: [1]   Go Down

Author Topic: Banded Horn/Pewter Tip  (Read 2432 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Banded Horn/Pewter Tip
« on: November 06, 2009, 07:03:22 PM »
 This horn Is about 11" around the outside curve.  The base is Cherry colored with oven cleaner, is about 2" across and is held in with 4 steel pins that are hidden under the first band. It has four turned horn bands that were boiled in a dye bath and pressed on then two steel pins were put in each. The tip is pewter, it is about 1 3/4 X 3/4"and is pinned to the neck with a steel pin. The body was treated with AF.  

 Tim C.



« Last Edit: November 06, 2009, 09:18:39 PM by Tim Crosby »
Logged

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1394
Re: Banded Horn/Pewter Tip
« Reply #1 on: November 06, 2009, 08:35:20 PM »
Tim is the pewter tip threaded or pinned to the horn. Neat looking horn.
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Re: Banded Horn/Pewter Tip
« Reply #2 on: November 06, 2009, 09:08:13 PM »
Quote from: B.Barker on November 06, 2009, 08:35:20 PM
Tim is the pewter tip threaded or pinned to the horn. Neat looking horn.

 It is pinned. I should have said that in the post, I will add that. Thanks

 Tim C.

Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Banded Horn/Pewter Tip
« Reply #3 on: November 06, 2009, 11:22:20 PM »
Tim, is very nice.  I especially like the idea for pewter for the tip. And the coloring is complimentary.  Great job again.
Gary

Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."
Pages: [1]   Go Up
« previous next »