« previous next »
Pages: [1]   Go Down

Author Topic: Pin Hole Marker  (Read 3008 times)

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Pin Hole Marker
« on: February 22, 2023, 06:56:14 AM »
Made this last week to mark pin holes for tennons and pipes. Best used on octagon barrels so I can’t say it’s better than dividers, but I’ve seen one like this used and thought I’d make one. Scrap wood, 10-32 all thread, washers, and wing nuts.





Logged

Offline bluenoser

  • Hero Member
  • *****
  • Posts: 834
Re: Pin Hole Marker
« Reply #1 on: February 22, 2023, 04:08:38 PM »
Great idea.
Add a bubble level and it should work equally as well on round barrels.
Logged

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: Pin Hole Marker
« Reply #2 on: February 22, 2023, 07:15:49 PM »
Quote from: bluenoser on February 22, 2023, 04:08:38 PM
Great idea.
Add a bubble level and it should work equally as well on round barrels.

I like that idea and will try it. Have a Trade Gun build to start with the octagon to round barrel.
Thanks.
Logged

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2531
Re: Pin Hole Marker
« Reply #3 on: March 04, 2023, 01:16:17 AM »
And you even used pretty wood!
Logged
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline Wingshot

  • Full Member
  • ***
  • Posts: 229
  • Brand new NMLRA member
Re: Pin Hole Marker
« Reply #4 on: March 04, 2023, 04:40:02 AM »
Made a similar version of this today, pretty slick and simple. Thanks for putting this up, sometimes the simplest of things are the best.
Logged

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: Pin Hole Marker
« Reply #5 on: March 06, 2023, 04:59:44 AM »
Thanks for the replies, it is a handy little tool to have on the bench.
Logged
Pages: [1]   Go Up
« previous next »