« previous next »
Pages: [1]   Go Down

Author Topic: Davis  (Read 1436 times)

Offline Duane Harshaw

  • Full Member
  • ***
  • Posts: 100
Davis
« on: March 29, 2023, 01:50:18 AM »
   Does anyone know where Davis locks are made...
Logged
Coaldale Alberta Canada

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Davis
« Reply #1 on: March 29, 2023, 02:03:11 AM »
Quote from: Duane Harshaw on March 29, 2023, 01:50:18 AM
   Does anyone know where Davis locks are made...
I am guessing that they are made in the Mould and Gun Shop in Southern Ohio.Log Cabin bought the name which is a well known and long time identifier here in the Lower 48 and besides the name there were and still are a wide variety of moulds for the parts needed to make a lock.I have no idea as to who does the heat treating and assembly on finished castings.
Bob Roller
Logged

Offline bob in the woods

  • Hero Member
  • *****
  • Posts: 4555
Re: Davis
« Reply #2 on: March 29, 2023, 02:46:40 AM »
I read that the Log Cabin Shop has maintained the Davis relationship re Larry Zorn,
so I expect the castings are still coming from the Mold and Gun Shop.  I don't know who's assembling the locks, but you could simply ask the L.C.Shop
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Davis
« Reply #3 on: March 29, 2023, 03:53:29 PM »
I'm pretty sure Zornes is doing the assembly.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Gaeckle

  • Hero Member
  • *****
  • Posts: 1360
Re: Davis
« Reply #4 on: March 30, 2023, 01:11:52 AM »
Quote from: Mike Brooks on March 29, 2023, 03:53:29 PM
I'm pretty sure Zornes is doing the assembly.

Some but not all. The percussion locks and a few other flintlocks are assembled elsewhere
Logged

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4413
  • We all make mistakes.
Re: Davis
« Reply #5 on: March 30, 2023, 01:31:03 AM »
  According to Log Cabin they are overhauling the whole Davis issue. They are working on all of it.
Logged

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: Davis
« Reply #6 on: April 01, 2023, 04:18:31 AM »
  I would think a number of those moulds would have a lot of "mileage"on them and renewal is the only optio.
Bob Roller
Logged

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: Davis
« Reply #7 on: April 01, 2023, 04:59:39 AM »
I spoke with Log Cabin and they are aware that finishing issues are a problem. I think they'll get it sorted out.
Logged
Pages: [1]   Go Up
« previous next »