Author Topic: Belted Ball  (Read 1785 times)

Offline Feltwad

  • Hero Member
  • *****
  • Posts: 892
Belted Ball
« on: October 23, 2022, 05:33:53 PM »
Question
Was the belted ball used other than the Uk for sporting rifles to shoot game
Feltwad

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: Belted Ball
« Reply #1 on: October 23, 2022, 08:11:50 PM »
Not aware of belted ball rifles other in the UK, Feltwad.

May have been in Germany as well, but again, have not heard of one.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7011
Re: Belted Ball
« Reply #2 on: October 24, 2022, 02:27:48 AM »
Hi Feltwad,
I don't believe 2-groove barrels and belted balls were used in the US for any small arms, civilian or military.  Someone may have experimented with the British version but I don't think it ever caught on.  I believe muzzleloading cannon by Armstrong using the studded shell were used or at least tested in the US.

dave



"The main accomplishment of modern economics is to make astrology look good."

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: Belted Ball
« Reply #3 on: October 24, 2022, 02:53:19 AM »
Did Holland & Holland make a rifle using the belted ball? Or was that a cartridge gun?  :-\

Offline mr. no gold

  • member 2
  • Hero Member
  • ****
  • Posts: 2654
Re: Belted Ball
« Reply #4 on: October 24, 2022, 05:43:09 AM »
Seems to me that there was a discussion on this subject a long time ago. I do not recall when, but Majorjoel, (I believe) had a beautiful KY Rifle which had a two groove bore. Perhaps he will come in not this topic. He may yet have some photos of it even though he no longer owns the gun.
Dick


Offline Feltwad

  • Hero Member
  • *****
  • Posts: 892
Re: Belted Ball
« Reply #6 on: October 24, 2022, 11:18:17 AM »
Enclosed are a couple of images of a park rifle with a 32inch Damascus octangle barrel a three-position leaf sights in 51 Cal and shoots a belted ball
Feltwad






Offline Bill Weedman

  • Jr. Member
  • **
  • Posts: 95
Re: Belted Ball
« Reply #7 on: October 24, 2022, 02:14:44 PM »
A belted ball was recovered from an archaeological excavation near Springfield, Illinois. The confederacy purchased approximately 2000 Brunswick rifles and the ball recovered matched the caliber of the first year production (.70 caliber) as the second and remaining years of production were .65 caliber. I suspect that the confederacy purchased the entire first year production.

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 1104
  • Send me your rifles for the ALR Library!
    • Black Powder Historian
Re: Belted Ball
« Reply #8 on: October 24, 2022, 04:19:52 PM »
This is the only non-UK belted ball rifle I've personally seen. It is by Abias B. Smith and is featured in The Longrifles of Western Pennsylvania and The Kentucky Rifle by Dillin.

https://www.rockislandauction.com/detail/74/1168/documented-abias-b-smith-pennsylvania-long-rifle
I am the Lead Historian/Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: Belted Ball
« Reply #9 on: October 24, 2022, 07:27:52 PM »
Now that is interesting, Seth. Tks for that "shot".  Heavy barrel.
I am aware of Purdy belted ball rifles in around .50 cal.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: Belted Ball
« Reply #10 on: October 25, 2022, 02:38:43 AM »
That looks like a substantial groove in that barrel with little or no "crown".

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15822
Re: Belted Ball
« Reply #11 on: October 25, 2022, 08:17:04 PM »
It might be filed out in the groove and land area, but can't tell due to the lighting.
\Filing out would make the grooves seem larger, but the bore should be correspondingly larger as well.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline yulzari

  • Full Member
  • ***
  • Posts: 222
Re: Belted Ball
« Reply #12 on: August 17, 2023, 07:07:04 PM »
A belted ball was recovered from an archaeological excavation near Springfield, Illinois. The confederacy purchased approximately 2000 Brunswick rifles and the ball recovered matched the caliber of the first year production (.70 caliber) as the second and remaining years of production were .65 caliber. I suspect that the confederacy purchased the entire first year production.
Just for the record. All British Brunswick rifles in service were in 0,704” bore. Some Honourable East India Company ones were in 0,753” musket bore. The Russians also were the same as the British but never got near America. However, the CSA did have some in 0,65” carbine bore that were probably volunteer rifles so actually civilian.
Nothing suceeds like a beakless budgie