Author Topic: bridle and sear screw size on Large Siler Lock (Read 907 times)

bama · « **on:** July 13, 2023, 01:20:46 AM »

Hi everyone

Does anyone know the size of these screws, I am building a couple of lock kits I picked up and these screws are missing.

Jim

Bob Roller · « **Reply #1 on:** July 13, 2023, 01:52:43 AM »

I THINK they are 8x32. Try one from a hardware store and see.Better yet call Chambers.
Bob Roller

bama · « **Reply #2 on:** July 13, 2023, 02:06:32 AM »

I believe you are correct Bob. I tried an 8x32 from another lock and that was the size used.

Thanks

Dale Halterman · « **Reply #3 on:** July 13, 2023, 04:07:50 AM »

Why not just buy them from Jim Chambers?

Dale H

P.W.Berkuta · « **Reply #4 on:** July 13, 2023, 08:34:08 AM »

TOTW has them also

Gaeckle · « **Reply #5 on:** July 13, 2023, 01:17:09 PM »

The Log Cabin Shop should have them

45-110 · « **Reply #6 on:** July 13, 2023, 01:38:45 PM »

Geeze it seems any lock builder should have a micrometer and a thread pitch gage! Not much of a tooling commitment.
kw

Goo · « **Reply #7 on:** July 13, 2023, 02:34:54 PM »

All of the Bridle and sear replacement screws I`ve had to make were 6-40

Bob Roller · « **Reply #8 on:** July 13, 2023, 04:11:01 PM »

All of my locks used 4x40 or 48 like the British locks.IF need be the holes can enlarged to 5x40 or 48. 6x40 for hammer to tumbler.
Bob Roller

AmericanLongRifles Forums