Author Topic: Bench mounted metal shear?  (Read 1092 times)

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19477
Bench mounted metal shear?
« on: July 26, 2023, 04:36:08 PM »
Any recommendations on a bench mounted metal shear? I can use my neighbor’s but am tempted to get one for rough shaping patch boxes, thimbles, and sheet metal buttplates. I see some running from $125-$700. And there’s this combo shear/punch press which looks heavy duty. It would get occasional use. Recommendations?



Andover, Vermont

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2212
Re: Bench mounted metal shear?
« Reply #1 on: July 26, 2023, 08:19:08 PM »
Since most of your work is with 0.040" to 0.062" brass for your patchbox material I think those heavy-duty shears are a bit overkill and expensive. Most if not all of my extra material profile removal is done with a cheap Harbor Freight metal bandsaw with a high quality 10 - 14 tooth bi-metal blade. It cuts fast and accurately. I then use files to true up the profile and when there are piercings, I use the ubiquitous Jewlers saw. A wood bandsaw can do the work also using a GOOD bi-metal blade with fine teeth (14 TPI) or a variable tooth pitch - 10 - 14 TPI (on brass or aluminum using the wood bandsaw). Those blades will last you a LONG time and don't waste your money on those cheap carbon steel blades.
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Bench mounted metal shear?
« Reply #2 on: July 26, 2023, 08:29:01 PM »
Harbor Freight use to carry a bench shear for around $100. I never found I needed a shear enough to warrant the cost of a Beverly shear. I bought one of the HF ones and have been very pleased with it with the thickness of materials used in my gun work.   
Bob
South Carolina Lowcountry

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19477
Re: Bench mounted metal shear?
« Reply #3 on: July 26, 2023, 08:42:56 PM »
Lots to think about. I’ve got by without a bandsaw so far but maybe it’s time.
Andover, Vermont

Offline P.Bigham

  • Hero Member
  • *****
  • Posts: 596
Re: Bench mounted metal shear?
« Reply #4 on: July 27, 2023, 01:26:51 AM »
A fine chisel hammered against a soft backup plate can get you very close without the use of a saw or or cutoff tool.
" not all who wander are lost"

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19477
Re: Bench mounted metal shear?
« Reply #5 on: July 27, 2023, 03:58:35 AM »
A fine chisel hammered against a soft backup plate can get you very close without the use of a saw or or cutoff tool.
I bet that’s how they did it back then!
Andover, Vermont

Offline Goo

  • Hero Member
  • *****
  • Posts: 708
Re: Bench mounted metal shear?
« Reply #6 on: July 27, 2023, 03:05:58 PM »
I have one I dont use it every day but when I do need it the cuts happen in seconds saves lots of time , get one with a hole for shearing rods.
Opinions are expensive. Rich people rarely if ever voice their opinion.

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5119
Re: Bench mounted metal shear?
« Reply #7 on: July 27, 2023, 05:07:40 PM »
You might also want to consider electric sheet metal shears.  They are used in the auto body and HVAC fields.  i'm sure they probably have battery operated ones by now.
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline oldtravler61

  • Hero Member
  • *****
  • Posts: 4412
  • We all make mistakes.
Re: Bench mounted metal shear?
« Reply #8 on: July 27, 2023, 06:25:31 PM »
  Just a thought but I have had good luck using my scroll saw. It has a variable speed on it and I put a drop of oil on the brass as I cut.