Author Topic: WADS for hunting  (Read 840 times)

Offline smoke

  • Jr. Member
  • **
  • Posts: 68
WADS for hunting
« on: July 25, 2023, 06:42:02 AM »
Hi I want to use bear oil for hunting lube so I want to use a wad between patch and powder so should I use CORIGATED cardboard 2 or 3 pieces glued together or ceriel box material to keep the oll from soaking toe bp.this load could sit all day.any experience? Smoke

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7845
Re: WADS for hunting
« Reply #1 on: July 25, 2023, 06:51:26 AM »
I use card wads from TOTW, I think they are 1/8th inch thick.  .610 dia for my 62 flint rifle.

Online JBJ

  • Hero Member
  • *****
  • Posts: 618
Re: WADS for hunting
« Reply #2 on: July 25, 2023, 02:49:21 PM »
Try snug fitting wads cut from milk cartons or OJ containers. With their liquid proof coatings, they should prevent migration of bear oil from your patches.

J.B.

Offline Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3390
Re: WADS for hunting
« Reply #3 on: July 25, 2023, 04:47:15 PM »
From a practical point of view, a wad of wasps nest works awful well.
I say practical, as not much is written about using it back then.

Offline stikshooter

  • Full Member
  • ***
  • Posts: 126
Re: WADS for hunting
« Reply #4 on: July 26, 2023, 04:32:18 AM »
Hi I want to use bear oil for hunting lube so I want to use a wad between patch and powder so should I use CORIGATED cardboard 2 or 3 pieces glued together or ceriel box material to keep the oll from soaking toe bp.this load could sit all day.any experience? Smoke
I too use bear oil , but over the powder I use a Dura Felt wad (dry) punched out with a cheap Harbor Freight hole punch set ($15.00 )/Ed