« previous next »
Pages: [1]   Go Down

Author Topic: ramrod worm  (Read 2420 times)

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 556
    • D Fruth Flintlocker
ramrod worm
« on: July 08, 2023, 07:14:13 PM »
This is the same size as the rod and slides into the entry hole.







Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2260
  • Oklahoma
Re: ramrod worm
« Reply #1 on: July 08, 2023, 07:33:12 PM »
Is this a new offering?
Logged
Psalms 144

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 556
    • D Fruth Flintlocker
Re: ramrod worm
« Reply #2 on: July 08, 2023, 08:10:49 PM »
Yes it is
Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"

Offline Brokennock

  • Hero Member
  • *****
  • Posts: 661
Re: ramrod worm
« Reply #3 on: July 08, 2023, 09:13:03 PM »
Quote from: Dan Fruth on July 08, 2023, 07:14:13 PM
This is the same size as the rod and slides into the entry hole.








That's awesome. How much does it taper?
The #1 gun I would want to put one of these with is tricky with ramrod size. Each pipe from front to entry pipe is slightly smaller.
Logged

Offline Nessmuck

  • Hero Member
  • *****
  • Posts: 529
Re: ramrod worm
« Reply #4 on: July 09, 2023, 05:54:29 AM »
Ok...so what am I looking at here ?

I have one of your worms already.
What does this set up do ? And thanks
Logged

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 556
    • D Fruth Flintlocker
Re: ramrod worm
« Reply #5 on: July 09, 2023, 03:45:03 PM »
This is small enough to fit permanently on your ramrod. It is .03 smaller than the ramrod hole diameter and is always in the gun   I have collected several originals of this type.
Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: ramrod worm
« Reply #6 on: July 09, 2023, 09:21:06 PM »
That is very neat!
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: ramrod worm
« Reply #7 on: July 10, 2023, 03:13:35 AM »
I have two of Dan's reversible worms.  They are as good a quality as anyone has a right to expect.  Like little jewels.  Nicely done Dan.   God Bless,   Marc
Logged

Offline stumbling buffalo

  • Starting Member
  • *
  • Posts: 16
Re: ramrod worm
« Reply #8 on: August 05, 2023, 05:49:36 PM »
Dan,

This looks like the perfect size to clean out the ignition chamber of a patent breech.  Am I off base or do you think that will work?

Thanks, Guy

Logged

Offline Cades Cove Fiddler

  • Hero Member
  • *****
  • Posts: 1717
Re: ramrod worm
« Reply #9 on: August 08, 2023, 06:28:11 PM »
 :o ;) :) :)... I like this,... !!! ... what is the smallest calibre size you make,...?
Logged

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 556
    • D Fruth Flintlocker
Re: ramrod worm
« Reply #10 on: August 09, 2023, 05:31:43 AM »
I make these 1/32 smaller than 5/16 and 3/8
Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: ramrod worm
« Reply #11 on: August 09, 2023, 06:42:09 AM »
Well Dan, now you have done it.  Looks like I may have to purchase yet another worm from you!!!!!  8)


Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1862
    • My etsy shop
Re: ramrod worm
« Reply #12 on: August 09, 2023, 03:04:04 PM »
Nifty
Logged

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 556
    • D Fruth Flintlocker
Re: ramrod worm
« Reply #13 on: August 09, 2023, 04:55:36 PM »
I'll have plenty!!  See you at the CLA!
Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"

Offline Nessmuck

  • Hero Member
  • *****
  • Posts: 529
Re: ramrod worm
« Reply #14 on: August 20, 2023, 05:48:20 PM »
Any videos of this set up ? And thanks
Logged

Offline Huckleberry

  • Starting Member
  • *
  • Posts: 31
Re: ramrod worm
« Reply #15 on: September 12, 2023, 05:07:27 AM »
Mr. Fruth - I sent you a PM
Logged

Offline Dan Fruth

  • Hero Member
  • *****
  • Posts: 556
    • D Fruth Flintlocker
Re: ramrod worm
« Reply #16 on: September 14, 2023, 04:10:39 AM »
I sent you a response. Thanks
Logged
The old Quaker, "We are non-resistance friend, but ye are standing where I intend to shoot!"
Pages: [1]   Go Up
« previous next »