jewelers saw?

[ScottH]

I have my Kibler SMR all assembled, pins sticking out everywhere.
Now I think I need to slot the barrel lugs?
What is a good source for a Jewelers saw?

Thanks! 

[mountainman]

Log Cabin Shop at Lodi, Oh

[wibper]

I bought mine at my local Woodcraft.  The salesperson knew what I wanted when I asked for it, though it's labelled as something else where it's hanging on a peg in the saws aisle.

[bluenoser]

Worn our hacksaw blades are generally still sharp for an inch or two at each end.  Grind the back off the end of an old fine-tooth blade until it will fit the hole and wrap some tape around the blade for a handle.  I prefer them to cut on the pull stroke.

[P.W.Berkuta]

I use Rio Grande for stuff like this. <https://www.riogrande.com/>. I use the German style frame and find it to works well for me plus the price is right. Stay away from the Economy Adjustable 2-3/4"Saw Frame . <https://www.riogrande.com/product/tools--equipment/saw-blades--frames/saw-frame/>

[NRFord]

Used a round, needle point file. I didn't enlarge hole just lengthened it parallel with barrel. Unless you want more tools...