Author Topic: William Barr-NewYork City Muzzleloading 10 ga shotgun  (Read 3312 times)

Leighton

  • Guest
William Barr-NewYork City Muzzleloading 10 ga shotgun
« on: December 07, 2009, 04:03:29 AM »
I bought this from a friend of mine who has had it for near 50 years. The barrels were in the white and
I have just finished rebrowning them. I thought it was English,but discovered Wm. Barr was a gunsmith in NYC from
about 1839-1859. Does anyone know anything further about him. I will try to post a more full length pict tomorrow.


« Last Edit: December 11, 2009, 07:31:06 PM by Leighton »

Leighton

  • Guest
Re: William Barr-NewYork City Muzzleloading 10 ga shotgun
« Reply #1 on: December 11, 2009, 07:32:11 PM »
I have just posted the longer length picture

Offline 490roundball

  • Sr. Member
  • ****
  • Posts: 377
Re: William Barr-NewYork City Muzzleloading 10 ga shotgun
« Reply #2 on: December 11, 2009, 08:53:09 PM »
Leighton:

Can't help you with Mr. Barr, but nice color on the barrels.  I hope the Birmingham barrels I have to do turn out as well.  Did you use one of the available solutions, or mix your own?

Rick
« Last Edit: December 11, 2009, 08:53:50 PM by Rick Losey »
"It's a poor word that can't be spelt two ways" Tom Yeardley in Swanson's Silent Drum

Leighton

  • Guest
Re: William Barr-NewYork City Muzzleloading 10 ga shotgun
« Reply #3 on: December 11, 2009, 09:07:42 PM »
This was a VERY difficult barrel to brown because of the high steel content. I started with Mark Lee solution,but finally went to Greeners formula full strength.

Greener Browning Formula

The solution is as follows:-
1oz Muriate tincture of steel (Tinc of Ferric Chloride13%)
1oz spirits of wine  [you don't need)
1/4oz muriate of mercury [mercuric chloride)
1/4oz strong nitric acid
1/8oz blue stone [copper sulphate]
1 qt water
 
« Last Edit: December 11, 2009, 09:08:28 PM by Leighton »

Offline Curt J

  • member 2
  • Hero Member
  • ****
  • Posts: 1521
Re: William Barr-NewYork City Muzzleloading 10 ga shotgun
« Reply #4 on: December 12, 2009, 06:23:01 PM »
William Barr was indeed a NYC gunsmith/gunmaker. He is listed in Vol. 5 of the five volume set of books The New York State Firearms Trade by H. J. Swinney, compiled by Tom Rowe.

Barr is listed in NYC directories as early as 1835. His shop was at 106 Beekman Street from 1835 through at least 1850. He was listed in the 1850 Industrial Census: $500 invested, employed one hand @ $30 per month, purchased 40 barrels, mountings, etc., @ $160; made 40 guns totalling $480, did repairs, etc. worth $750.

There were several other gunsmiths named Barr in NYC also, probably related.

flintsteel

  • Guest
Re: William Barr-NewYork City Muzzleloading 10 ga shotgun
« Reply #5 on: December 14, 2009, 02:25:51 AM »
Leighton stole that gun from me at the Tulsa show.  I was feeling vulnerable and he took full advantage of me........though he did part with a fantastic early breechloading W.W. Greener cause he was feeling sorry for me.  Really, I cannot think of anyone I'd rather have the gun than Leighton--he'll undo the damage I did to it back in the '50's and is proud of it.  Good combination. 

JBlk

  • Guest
Re: William Barr-NewYork City Muzzleloading 10 ga shotgun
« Reply #6 on: December 14, 2009, 04:47:43 PM »
That sure is a beautiful old double.There is something about a  fine old double that really reminds me of perfection in the gun building art.I'll bet that the original owner was walking on clouds when he obtained this one.