« previous next »
Pages: [1]   Go Down

Author Topic: Finished the wire inlay in the pistol grip.  (Read 3443 times)

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Finished the wire inlay in the pistol grip.
« on: February 07, 2010, 03:18:47 PM »
Thank you all for your help and advice.  I've finished the wire inlay in the pistol grip. I think it went OK. I used 0.01"x 0.05" pure silver ribbon, anchored on the bottom as recommended. No problems with getting it to follow the curves of the stock.






I'll be starting on the muzzle cap next.

Best regards
Rolfkt
« Last Edit: February 07, 2010, 06:09:29 PM by Rolfkt »
Logged

Daryl

  • Guest
Re: Finished the wire inlay in the pistol grip.
« Reply #1 on: February 07, 2010, 04:57:13 PM »
Nicely done. Rolfkt.
Logged

Offline Dave B

  • Hero Member
  • *****
  • Posts: 3132
Re: Finished the wire inlay in the pistol grip.
« Reply #2 on: February 07, 2010, 05:47:39 PM »
This looks beautiful Rolfkt, Its more difficult to do wire work on a multi-curved surface, nice job. I have always liked how the wire adds a nice touch of class to the  project when done tastefully.
Logged
Dave Blaisdell

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7013
Re: Finished the wire inlay in the pistol grip.
« Reply #3 on: February 07, 2010, 06:41:54 PM »
Hi Rolf,
Well done!  It is a very nice accent.  Your other post about transferring the design from one side to the other is good.  The technique is similar to what is done with engraving designs. 

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Tom Currie

  • Hero Member
  • *****
  • Posts: 1294
Re: Finished the wire inlay in the pistol grip.
« Reply #4 on: February 07, 2010, 06:59:25 PM »
Well done
Logged
Pages: [1]   Go Up
« previous next »