« previous next »
Pages: [1]   Go Down

Author Topic: Another Horn With two Bands  (Read 2368 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18391
  • AKA TimBuckII
Another Horn With two Bands
« on: March 24, 2010, 07:21:44 PM »
 This one is about 12 1/2" around the outside curve. The Cherry base is hollowed out and is about 2's. The horn fits up inside the base and held on with steel pins. The tip is antler and is pined on, it is about 2" X 5/8s. The two horn bands are now pinned on, when the pics taken then were only heated and pressed on. One slipped so I pined them both.

 Tim C.





Logged

omark

  • Guest
Re: Another Horn With two Bands
« Reply #1 on: March 24, 2010, 08:12:21 PM »
very nice, tim, very nice   mark
Logged

smorrison

  • Guest
Re: Another Horn With two Bands
« Reply #2 on: March 26, 2010, 02:49:41 AM »
Nicely done Tim!

Scott
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Another Horn With two Bands
« Reply #3 on: March 26, 2010, 03:26:42 AM »
Tim,

It looks like there ought to be a third band.   Is there a reason there are only two toward the butt of the horn?

Mark E
Logged
Pages: [1]   Go Up
« previous next »