« previous next »
Pages: [1]   Go Down

Author Topic: tennessee entry pipe  (Read 2229 times)

Offline frenchman

  • Sr. Member
  • ****
  • Posts: 482
  • Keep it simple
tennessee entry pipe
« on: April 21, 2010, 12:48:49 AM »
this entry pipe will have no tang so is it flush with the stock or do i bring it in the stock about 1/16
Logged
Denis

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: tennessee entry pipe
« Reply #1 on: April 21, 2010, 02:08:24 AM »
I've seen both but most common in my experience has been into the stock a little.  Some look more like they were driven into the stock.
I think this picture will help.
Ken

« Last Edit: April 21, 2010, 02:34:44 AM by Ken Guy »
Logged
Failure only comes when you stop trying.

Offline frenchman

  • Sr. Member
  • ****
  • Posts: 482
  • Keep it simple
Re: tennessee entry pipe
« Reply #2 on: April 21, 2010, 03:24:19 AM »
 Ken many thanks
Logged
Denis
Pages: [1]   Go Up
« previous next »