« previous next »
Pages: [1]   Go Down

Author Topic: Gun For A Nephew  (Read 4532 times)

greybeard

  • Guest
Gun For A Nephew
« on: January 16, 2011, 01:15:08 AM »
A while back a nephew saw a gun I had builtt and asked me to do one foe him with his name and mine on it. He sent me twice what I quoted him so it comes with everything he will need to use and care for the gun and it all fits in an oak case.  But for the patch box and toe plate the rest of the inlays are sterling.












   
Logged

greybeard

  • Guest
Re: Gun For A Nephew
« Reply #1 on: January 17, 2011, 09:57:48 AM »
Sorry folks. I had this post locked. DUH!!
Logged

Offline bama

  • Hero Member
  • *****
  • Posts: 2174
    • Calvary Longrifles
Re: Gun For A Nephew
« Reply #2 on: January 17, 2011, 01:26:42 PM »
Nicely done uncle Bob. I am sure he will enjoy and treasure the efforts that you have put into this very nice set.
« Last Edit: January 17, 2011, 01:27:15 PM by bama »
Logged
Jim Parker

"An Honest Man is worth his weight in Gold"

Timo

  • Guest
Re: Gun For A Nephew
« Reply #3 on: January 17, 2011, 03:18:30 PM »
very nicely done!
Logged

Offline Old Ford2

  • Hero Member
  • *****
  • Posts: 1102
Re: Gun For A Nephew
« Reply #4 on: January 17, 2011, 04:16:55 PM »
Greybeard
That is a fine looking rifle, and you have a very fortunate nephew!
It is nice to have some of our younger people to carry the torch.
Best regards
Old Ford
Logged
Never surrender, always take a few with you.
Let the Lord pick the good from the bad!

flintman-tx

  • Guest
Re: Gun For A Nephew
« Reply #5 on: January 17, 2011, 06:30:03 PM »
Wish I would have had an uncle like that!!!
Logged

gregg

  • Guest
Re: Gun For A Nephew
« Reply #6 on: January 17, 2011, 07:08:29 PM »
Workmanship great and what a piece of nice wood.
Logged

greybeard

  • Guest
Re: Gun For A Nephew
« Reply #7 on: January 17, 2011, 07:35:44 PM »
Thanks to you all for  your responses. I was startin t think no one liked it. Twas a lot of work but the end result seems to be worth it.
Logged

Offline longcruise

  • Hero Member
  • *****
  • Posts: 1839
  • Arvada, Colorado
Re: Gun For A Nephew
« Reply #8 on: January 18, 2011, 12:04:22 AM »
How do I apply to be adopted!!??
Logged
Mike Lee

Offline KLMoors

  • Hero Member
  • *****
  • Posts: 859
Re: Gun For A Nephew
« Reply #9 on: January 18, 2011, 02:17:05 AM »
Dittos!! That's one lucky nephew. What are the specs on it. Caliber, barrel size, etc?
Logged

greybeard

  • Guest
Re: Gun For A Nephew
« Reply #10 on: January 18, 2011, 06:58:47 AM »
Hi Capt;  .50 + 15/16 + 42.. I made the faceted thimbles and the single trigger set up. The carving and engraving designs are my own interpetation of work done by the oldtimers. I have never seen or handled an original so every thing I do has to be gleand from pics and my imagination so there are a lot of elements that are perhaps not historicaly? correct.
Thanks for responding
Logged
Pages: [1]   Go Up
« previous next »