« previous next »
Pages: [1]   Go Down

Author Topic: Howard Kelly and Webertown barrels?  (Read 6416 times)

Offline Skychief

  • Hero Member
  • *****
  • Posts: 651
Howard Kelly and Webertown barrels?
« on: January 25, 2011, 06:57:44 AM »
Can any of you comment on these barrels and their quality, finish and accuracy please?

Many thanks for any experiences you can share concerning the barrels.

Skychief.
Logged

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5118
Re: Howard Kelly and Webertown barrels?
« Reply #1 on: January 25, 2011, 07:45:24 AM »
I have one of his chunk gun barrels.  It's a .50 cal. that's 1-1/8" across the flats and 50" long.  I can't comment on its accuracy because its not been installed in a stock yet.  The quality is as good as any.  I never comment on the finish of a barrel because its unimportant to me, as the finish will be what I make it.  Does that help?
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
Re: Howard Kelly and Webertown barrels?
« Reply #2 on: January 25, 2011, 03:33:03 PM »
    I have used Howard for several custom barrels octagon to round smooth and rifled.   Howard is noted for his chunk gun barrels as per TOF's post.   The one rifled barrel is in the hands of the client, and he says it is very accurate.  I recently shot the 54 smooth barrel to regulate the sights, and I was impressed that as a smoothie it punched five holes touching at 25 yards w/ no load development.  The other rifled barrel is sitting in a stock waiting to be finished.  The exterior finish is about like a Colerain, as he does not drawfile them as some do for extra $$.  I have no problems using Howard's barrels, and will use them in the future.  His delivery time was really great, and he can make barrels up to 50" long..as I remember.   Good value for the $$.   Howard is also a Banjo picker FWIW.      Ron

Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Re: Howard Kelly and Webertown barrels?
« Reply #3 on: January 25, 2011, 05:55:49 PM »
i used one of his barrels it was a 1 1/2 oct for a bench gun, it shot great, no problems the guy that bought it now out shoots me with it....
paul
Logged

Offline Paddlefoot

  • Hero Member
  • *****
  • Posts: 1844
Re: Howard Kelly and Webertown barrels?
« Reply #4 on: January 25, 2011, 10:12:54 PM »
So how do we contact this gent.? I may want an extra long barrel for something I have planned.
Logged
The nation that makes great distinction between it's warriors and it's scholars will have it's thinking done by cowards and it's fighting done by fools. King Leonidas of Sparta

Offline Skychief

  • Hero Member
  • *****
  • Posts: 651
Re: Howard Kelly and Webertown barrels?
« Reply #5 on: January 26, 2011, 02:27:14 AM »
Do any of you know what kind of steel he uses in his barrels?   Any opinions of that steel?

Thanks for the replies everybody.

Skychief.
Logged

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 794
Re: Howard Kelly and Webertown barrels?
« Reply #6 on: January 26, 2011, 06:18:04 AM »
    Does Howard Kelly have a web site?    AL
Logged
Alan K. Merrill

galudwig

  • Guest
Re: Howard Kelly and Webertown barrels?
« Reply #7 on: January 26, 2011, 06:26:20 AM »
No web site that I'm aware of (he's old school!  ;D)

Howard Kelley
Webertown Rifleworks
1098 Webertown Rd.
Lynchburg, Ohio 45142
(937) 364-2086

Not sure what kind of steel he uses but all his barrels are cut rifled and he will put whatever twist rate you wish in it.  He can make barrels up to 54" in length and up to 1 3/8" across the flats.  I'm building a chunk gun around one of his 48" x 1 1/8" .50 cal. barrels I bought from him at Friendship a few years back.  Heck of a nice guy and a heck of a fiddle player too.  He always sets up at Friendship just North of Tip Curtis and across the alley from the gunsmith's shop. 

galudwig
Logged

Bill

  • Guest
Re: Howard Kelly and Webertown barrels?
« Reply #8 on: January 30, 2011, 04:21:16 AM »
When you contact him, ask about his bluegrass CD that he has. Great music to listen to while you're working in the gun :)
Bill
Logged
Pages: [1]   Go Up
« previous next »