« previous next »
Pages: [1]   Go Down

Author Topic: Thimble facets  (Read 4116 times)

greybeard

  • Guest
Thimble facets
« on: February 16, 2011, 01:54:15 AM »
I am perhaps inventing the wheel allover again for most members on this site but heres what I do to help mt tired old eyes . Apply cold blue to the thimbles before filing the facets. I find it much easier to see what ti file and what not to file.








This is what works for me and I finally have a use for cold blue that I din't find to ofensive. Bob
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Re: Thimble facets
« Reply #1 on: February 16, 2011, 02:33:07 AM »
 Good idea, I like it.

 Thanks, Tim C.
Logged

Offline TPH

  • Hero Member
  • *****
  • Posts: 923
Re: Thimble facets
« Reply #2 on: February 16, 2011, 02:53:47 AM »
I agree. Funny, but things like that are a lot harder than they were 20 years ago. I have a heck of a time inletting barrels now - and everything else.

D^*ned bifocals....
« Last Edit: February 16, 2011, 02:55:34 AM by TPH »
Logged
T.P. Hern

Offline A.Merrill

  • Hero Member
  • *****
  • Posts: 797
Re: Thimble facets
« Reply #3 on: February 16, 2011, 03:01:54 AM »
    That would be a big help. Thanks for the tip.    AL
Logged
Alan K. Merrill

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Thimble facets
« Reply #4 on: February 16, 2011, 04:41:05 AM »
Bob,
I use a Sharpie to darken the flats while filing.  Similar to your cold blue method.
DMR
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Thimble facets
« Reply #5 on: February 16, 2011, 05:24:36 AM »
This old dog just learned a new trick! :D

But now he has to remember it.  >:(
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline Blacksmoke

  • Hero Member
  • *****
  • Posts: 873
  • "Old age and treachery beats youth and skill"
Re: Thimble facets
« Reply #6 on: February 17, 2011, 03:18:09 AM »
 Also darkening your metal whilst filing or engraving it helps to cut down on "flash back" and hence a set of sore eyes after a while.     ;)        Hugh Toenjes
Logged
H.T.

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4477
    • Personal Website
Re: Thimble facets
« Reply #7 on: February 17, 2011, 04:00:55 AM »
If your eyes are decent, another quick trick while filing is to just run your hand over the filed surface.  It will oxidize just enough to be able to tell where you are cutting when you start filing again.  It's not something I do often, but once in a while it can be useful. 
Logged

greybeard

  • Guest
Re: Thimble facets
« Reply #8 on: February 17, 2011, 09:15:50 PM »
Boy, ain't it a fact that you can learn something new every day.
Logged
Pages: [1]   Go Up
« previous next »