Author Topic: My third rifle  (Read 5416 times)

hoochiepapa

  • Guest
My third rifle
« on: March 09, 2011, 10:00:50 PM »
Ok, fellers fire away! I've already weathered the storm on another web, and pretty much know what should have been.






.50 cal. Rice swamped 42" barrel, round bottom rifling, L&R lock, home made trigger, first free hand carving, Dixon's pre-carve without lock inlet, hired out the engraving. (Going to GRS school this April)

greybeard

  • Guest
Re: My third rifle
« Reply #1 on: March 10, 2011, 01:58:25 AM »
Very nice indeed. I see one or two things but critique is best left to more learned folks than myself. All in all I like it very much.   Bob

gregg

  • Guest
Re: My third rifle
« Reply #2 on: March 10, 2011, 03:22:38 AM »
I'm secound in line here so I will knock the lock panel.
Only because I can get my back side burned and maybe learn
more myself.
I will post more on rifle

gregg

  • Guest
Re: My third rifle
« Reply #3 on: March 10, 2011, 03:26:22 AM »
Now I will say what a wonderful rifle.
first free hand carving
You should be very proud of a rifle like that.
I could never hope to do so well.
Gregg
Yes what Phil said
« Last Edit: March 10, 2011, 07:09:06 AM by notgregg »

jeager58

  • Guest
Re: My third rifle
« Reply #4 on: March 10, 2011, 03:55:04 AM »
I cant critique  on being correct as far as the school goes but you should be proud of your work. I like it...phil

wetzel

  • Guest
Re: My third rifle
« Reply #5 on: March 10, 2011, 04:57:06 PM »
The rifle is beautiful and like the others said its hard to criticize something so nice.  What is GRS?  All that I know I have learned from others and am far, far from anything close to being an expert.  If it were mine and I could change anything, I would shrink the lock mortise down by about half.  Here is a question for you and the forum, is the silver patchbox accurate?  I have no idea, I just know that I have heard people say that german silver wasn't used much till later, although for pieces like the cheek piece I have observed them, so where if any is the line? What process do you use after carving to clean out the relieved area?  I have struggled to get those areas smooth. Your rifle in those areas looks perfect.  Have a great day.

hoochiepapa

  • Guest
Re: My third rifle
« Reply #6 on: March 10, 2011, 04:59:03 PM »
Thank you for your kind comments. I know the side panels are too big, and the comb is too high, so I will make corrections the next time. I was also told the forend could be made slimmer. ;D

hoochiepapa

  • Guest
Re: My third rifle
« Reply #7 on: March 10, 2011, 05:01:56 PM »
What I do for the carving is after I have drawn what I want, I follow the lines with a 1/8 gouge, and then level the surround with small files and cardboard nail files cut to different shapes.

gregg

  • Guest
Re: My third rifle
« Reply #8 on: March 11, 2011, 07:02:13 PM »
The rifle is beautiful. I keep going back to look at your rifle.

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: My third rifle
« Reply #9 on: March 11, 2011, 10:48:35 PM »
For the carving behind the cheekpiece look at Allen Martin's example on his thread about carvin on Smallpatch's rifle
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

KennyC

  • Guest
Re: My third rifle
« Reply #10 on: March 12, 2011, 06:45:29 PM »
I am not a gun builder so to critique someones rifle building skills are beyond me. All I can say is I would be proud to shoot that rifle. Just my 02

Meteorman

  • Guest
Re: My third rifle
« Reply #11 on: March 12, 2011, 08:03:43 PM »
won't comment on the gun, but that chair kinda frightens me.   
(kiddng.) 
nice job.