« previous next »
Pages: [1]   Go Down

Author Topic: antler powder measures  (Read 3172 times)

Offline PIKELAKE

  • Sr. Member
  • ****
  • Posts: 284
antler powder measures
« on: May 17, 2011, 02:56:54 AM »
I have a couple of white tail sheds and would like to make a couple of measures. I'd like to know what I could use to seal the inside of the horn once I have drilled them out. This one shed has a very porous pith, you can see light thru the end. I could drill it out and plug it with wood, but I was thinking of maybe shelac or real thin glue to seal the inside. I think bees wax would be too thick. I did a search and came up empty. The piece in question is from the middle of a tine. Thanks in advance.... JZ
Logged
JOHN ZUREKI

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Re: antler powder measures
« Reply #1 on: May 17, 2011, 03:13:38 AM »
Moved it for you Pinelake :) :) :)
« Last Edit: May 17, 2011, 03:13:50 AM by aka tallbear »
Logged

Offline Collector

  • Hero Member
  • *****
  • Posts: 993
Re: antler powder measures
« Reply #2 on: May 17, 2011, 03:24:54 AM »
Krazy Glue- Build-up a to a smooth surface and stabilizes it at the same time.
« Last Edit: May 17, 2011, 04:48:17 AM by G.Hansen »
Logged

Offline PIKELAKE

  • Sr. Member
  • ****
  • Posts: 284
Re: antler powder measures
« Reply #3 on: May 17, 2011, 04:17:35 AM »
Thank you Mr. Moderator for directing my post to the correct forum.  G. Hansen,  your suggestion for Krazy  Glue makes perfect sense. I knew there was a simple solution, you just have involve the right guy.      Thanks again,   JZ
Logged
JOHN ZUREKI
Pages: [1]   Go Up
« previous next »