Author Topic: Horn W/Two Bands & Screw Tip  (Read 3136 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Horn W/Two Bands & Screw Tip
« on: December 18, 2011, 10:59:14 PM »

  It is about 14” around the outside curve and about 11” straight across tip to end of base. The base is Cherry, about 2 ½”, it is held in by the same 4 steel pins that hold the base band, is about half hollowed out. The tip is Whitetail antler and is threaded 5/8-11. The center band was heated and pressed on then pinned with 4 steel pins for security.

  Tim C.






Offline Shovelbuck

  • Sr. Member
  • ****
  • Posts: 424
Re: Horn W/Two Bands & Screw Tip
« Reply #1 on: December 18, 2011, 11:08:09 PM »
Very nice work!!!!!
I don't hunt the hard way, I hunt a simpler way.

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Horn W/Two Bands & Screw Tip
« Reply #2 on: December 19, 2011, 04:29:56 AM »
Great job Tm. But that's what we've come to expect!!! BRAVO!

Steve
Steve Skillman

Offline Glenn Hurley Jr.

  • Full Member
  • ***
  • Posts: 188
Re: Horn W/Two Bands & Screw Tip
« Reply #3 on: December 19, 2011, 07:10:46 AM »
A really nice horn, Tim.

Horner75

  • Guest
Re: Horn W/Two Bands & Screw Tip
« Reply #4 on: December 19, 2011, 06:59:57 PM »
Nice horn Tim!

Rick

JohnnyM

  • Guest
Re: Horn W/Two Bands & Screw Tip
« Reply #5 on: December 20, 2011, 06:13:50 AM »
Superb work, Tim.  As usual.  That horn has soul!

Thanks for sharing.

Johnny

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Re: Horn W/Two Bands & Screw Tip
« Reply #6 on: December 20, 2011, 04:35:10 PM »
  Thanks Guys.

   Tim C.